The Genie 01.4001.0096GT Screw M20X55 UNI 5739 8.8 ZN is a genuine OEM fastener designed for Genie GTH telehandlers and select Genie Z-series articulating boom lifts. Sourced directly through the Genie OEM supply chain, this screw meets the dimensional and grade specifications called out in Genie parts documentation, giving you confidence that the replacement matches the original hardware. Confirmed fitment includes the GTH-3007, GTH-3007 IIIA, GTH-3007 IIIB, GTH-3007 AU.3, GTH-5519, GTH-5519 S, Z33/18, and Z-33 DC Power — always cross-reference part number 01.4001.0096GT against your machine's parts manual to verify it is the correct item for your specific unit.
Key Features
- Grade 8.8 Zinc-Plated Construction — The 8.8 property class rating delivers the tensile and yield strength required for structural fastener positions, while the zinc finish provides corrosion resistance in demanding outdoor environments.
- UNI 5739 Standard Compliance — Manufactured to UNI 5739 specification, ensuring dimensional conformity — thread pitch, shank diameter, and head geometry — that matches the original Genie engineering requirement exactly.
- Direct OEM Replacement — As a genuine Genie part, this screw drops into the original fastener position without adaptation, maintaining the engineered clamp load and torque specification for that joint.
- Broad Genie Equipment Fitment — Fits Genie GTH telehandlers and select Z-series articulating boom lifts, including the GTH-3007 and GTH-5519 model families and the Z33/18 and Z-33 DC Power.
- Structural Integrity at the Joint — A correctly rated fastener maintains the clamping force that holds critical assemblies together. A fastener of the wrong grade or dimension can loosen under load or allow joint movement, leading to accelerated wear or component failure.
- Operational Safety Compliance — On aerial and lifting equipment, fastener integrity at structural connection points is directly linked to safe operation. Using the correct OEM-specified grade and size keeps the machine within its engineered safety parameters.
A screw of this type functions as a structural fastener, clamping two or more components together and holding them firmly under the loads the machine generates during normal operation. The M20 shank diameter and 55 mm length determine where in the machine this fastener is applied, while the 8.8 grade designation sets the mechanical strength — specifically the minimum tensile and proof load the fastener must sustain without yielding. When a fastener in this position stretches, corrodes, or is replaced with an incorrect grade, the joint can lose clamping force, allowing movement between components that the assembly was never designed to tolerate. Replacing a worn or damaged fastener with the correct Genie OEM part restores the joint to its original specification and keeps the machine operating as designed.
Part Details
| Part Number | 01.4001.0096GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Screw M20X55 UNI 5739 8.8 ZN |
Compatibility & Fitment
| Name | Model |
|---|---|
| GTH-3007 IIIA | GTH-3007 IIIA |
| GTH-3007 IIIB | GTH-3007 IIIB |
| GTH-3007 | GTH-3007 |
| GTH-3007 AU.3 | GTH-3007 AU.3 |
| GTH-5519 | GTH-5519 |
| GTH-5519 S | GTH-5519 S |
| Z33/18 | Z33/18 |
| Z-33 DC Power | Z-33 DC Power |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
