The Genie 824215GT is a genuine OEM Pan Head Phillips Machine Screw, 10-32 x.75, ZAG, built for a wide range of Genie telescopic booms, articulating booms, scissor lifts, and telehandlers. As a direct OEM replacement, this screw is manufactured to the same dimensional and material standards as the original hardware installed at the factory. Cross-reference part number 824215GT against your machine's parts manual to confirm it is the correct fastener for your specific unit and application. This screw fits an extensive range of Genie equipment, including S and SX series telescopic booms, GS series scissor lifts, Z and ZX series articulating booms, and GTH series telehandlers.
Key Features
- Genuine OEM Dimensional Conformity — Manufactured to exact 10-32 x .75 thread and length specifications, with a zinc-alloy galvanized (ZAG) finish that matches the original hardware this screw replaces.
- Direct Hardware Replacement — Pan head Phillips drive profile installs with standard tooling and seats flush to the mating surface, just like the original fastener.
- Broad Genie Fleet Coverage — A single part number covers Genie S and SX telescopic booms, GS scissor lifts, Z and ZX articulating booms, and GTH telehandlers, making it a practical stocking item for mixed Genie fleets.
- Corrosion-Resistant Finish — The ZAG coating provides a protective layer against rust and surface oxidation, helping the fastener maintain clamping integrity over time in outdoor and jobsite environments.
- Structural Integrity Where It Counts — A loose, stripped, or corroded screw can compromise panel retention, cover attachment, or component mounting. Replacing worn hardware with the correct OEM fastener restores secure, properly torqued connections.
A pan head Phillips machine screw is a threaded fastener used to join components, secure covers, mount panels, or attach hardware throughout a machine. The pan head profile provides a wide bearing surface that distributes clamping load across the mating part, while the Phillips recess allows for fast, positive driver engagement. The 10-32 thread designation specifies both the screw's diameter and thread pitch, which must match the receiving threads exactly — an incorrect thread will not engage properly and can damage the tapped hole. When a screw is missing, stripped, or corroded, the component it secures can shift, rattle loose, or become inaccessible for service, making timely replacement with the correct OEM part important for keeping assemblies properly fastened.
Part Details
| Part Number | 824215GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Pan Head Phillips Machine Screw, 10-32 x .75, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-4047 | GS-4047 |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-1330m | GS-1330m |
| GS-4655 | GS-4655 |
| GS-4046 | GS-4046 |
| GS-1332m | GS-1332m |
| GS-1432m | GS-1432m |
| GS-1932m | GS-1932m |
| GTH-636 | GTH-636 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 N | Z-34/22 N |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
