The Genie 6179GT Round Head Machine Screw, 10-32 x 1.25 is a genuine OEM fastener built for Genie GR vertical mast lifts, S-series telescopic boom lifts, Z-series articulating boom lifts, and the Genie Tower. As a direct OEM replacement, this screw is manufactured to the exact thread pitch, head profile, and length specified by Genie, so it seats and torques correctly in the original fastener location. Cross-reference part number 6179GT against your machine's parts manual to confirm it is the correct item for your unit before ordering.
Key Features
- OEM Thread and Dimensional Accuracy — Manufactured to Genie's specified 10-32 thread pitch and 1.25-inch length, ensuring the fastener engages mating threads cleanly without rework.
- Round Head Machine Screw Profile — The round head profile provides the correct bearing surface and clearance called out in Genie's original design, so the screw installs directly in the intended location.
- Broad Genie Fleet Coverage — A single part number fits GR Runabout vertical mast lifts, S-series telescopic booms, Z-series articulating booms, and the Genie Tower, making it a practical stocking item for mixed Genie fleets.
- Secure, Lasting Clamping — A correctly sized fastener maintains the clamping load the joint was engineered for, preventing the loosening and component shift that an ill-fitting substitute screw can introduce over time.
- Genuine OEM Sourcing — Supplied as a genuine Genie OEM part through DHS Equipment, so you receive the same component that left the factory with your machine.
A round head machine screw is a threaded fastener used to clamp, secure, or locate components where the rounded, low-profile head must sit flush or proud of a panel, bracket, or housing surface. The 10-32 thread designation specifies both the screw's diameter and the number of threads per inch, and using a fastener with the correct specification matters because mismatched threads can strip the mating hole or fail to hold the designed clamping load. When a fastener of this type loosens or is lost, the component it secures can shift, rattle, or detach — replacing it promptly with the correct OEM part restores the joint to its original condition.
Part Details
| Part Number | 6179GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Round Head Machine Screw, 10-32 x 1.25 |
Compatibility & Fitment
| Name | Model |
|---|---|
| GR-8 | GR-8 |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| Genie Tower | Genie Tower |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-80 | S-80 |
| S-85 | S-85 |
| S-40 | S-40 |
| S-45 | S-45 |
| TZ-34/20 | TZ-34/20 |
| Z-30/20HD | Z-30/20HD |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/22 | Z-45/22 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
