The Genie 96522GT is a genuine OEM Slab Standard Control Harness Assembly designed for Genie GS scissor lifts, covering ANSI, CSA, and Australia-specification models. This assembly includes wire harnesses 96489GT, 96387GT, 96344GT, and 105321GT, delivering a complete, ready-to-install wiring solution. As a direct OEM replacement, it meets the same standards as the original part installed at the factory, so compatibility with your machine is assured. Confirmed fitment spans GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2632, GS-3232, GS-2046, GS-2646, GS-3246, GS-30, GS-32, and GS-46 models.
Key Features
- Genuine OEM Wiring Integrity — Manufactured to Genie OEM specification, ensuring correct conductor routing, connector types, and insulation grade for slab-model GS scissor lifts.
- Complete Harness Assembly — Supplied as a full assembly incorporating wire harnesses 96489GT, 96387GT, 96344GT, and 105321GT, so all interconnecting sub-harnesses arrive together in a single order.
- Broad GS Scissor Lift Coverage — Fits a wide range of Genie GS slab scissor lifts across ANSI, CSA, and Australia regulatory configurations, from the compact GS-1530 up to the GS-3246 and GS-46.
- Correct Regulatory Specification — Built specifically for ANSI, CSA, and Australia market machines, matching the control-circuit requirements of those compliance variants rather than a generic harness.
- Restored Control Circuit Function — A worn, damaged, or shorted control harness can cause intermittent or total loss of machine controls; replacing it with this OEM assembly restores proper electrical communication between the control panel and machine systems.
- Operational Safety Assurance — Control harness integrity is directly tied to safe platform operation on aerial equipment; using the correct OEM assembly maintains the intended electrical safeguards built into GS scissor lift control circuits.
The control harness is the electrical backbone connecting the platform and ground controls to the machine's operating systems on a scissor lift. It carries the signals that tell the machine to raise, lower, drive, and respond to safety inputs — so a damaged or degraded harness can produce erratic controls, fault codes, or a complete loss of function. The Genie 96522GT bundles all required sub-harnesses into one assembly, simplifying replacement and ensuring every connection in the control circuit is renewed with OEM-matched components. Cross-reference part number 96522GT against your machine's parts manual to confirm it is the correct harness for your specific unit and market specification before ordering.
Part Details
| Part Number | 96522GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Slab Standard Control Harness Assembly (ANSI, CSA and Australia Models), includes Wire Harnesses 96489GT, 96387GT, 96344GT and 105321GT |
Compatibility & Fitment
| Name | Model |
|---|---|
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-3232 | GS-3232 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-30 | GS-30 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
