The Genie 128200GT is a genuine OEM Toggle Switch Assembly, SPDT 3-Position Momentary, designed for a wide range of Genie telescopic boom lifts, articulating boom lifts, and scissor lifts. As a direct OEM replacement, this assembly is built to the same specification as the original component installed at the factory, ensuring correct electrical behavior and a drop-in fit. This part is confirmed for Genie S and SX series telescopic booms, Z and ZX series articulating booms, and GS series scissor lifts — covering an extensive range of models across the full Genie aerial lift lineup. Cross-reference part number 128200GT against your machine's parts manual to confirm it is the correct switch for your specific unit before ordering.
Key Features
- Genuine OEM Electrical Integrity — Manufactured to Genie OEM specification, ensuring correct switch resistance, contact rating, and momentary-action behavior for accurate circuit response.
- SPDT 3-Position Momentary Configuration — Single-pole double-throw, three-position momentary action matches the original switching logic of the control circuit it serves, so the assembly installs and operates exactly as designed.
- Broad Genie Fleet Coverage — Fits Genie S and SX telescopic boom lifts, Z and ZX articulating boom lifts, and GS scissor lifts across dozens of model variants, making this switch a high-value stocking item for mixed Genie fleets.
- Restored Control Function — A failed or intermittent toggle switch can cause erratic or unresponsive machine functions. Replacing it with the correct OEM assembly restores predictable, full-range operator control.
- Operator and Site Safety — On aerial lifts, reliable switch function is directly tied to safe machine operation. Using a genuine OEM switch assembly eliminates the risk of contact failure or mismatched switching logic in safety-critical control circuits.
A toggle switch assembly is the electromechanical interface between the operator and the machine's control circuits. In a single-pole double-throw (SPDT) momentary configuration, the switch connects one input circuit to one of two output paths only while the operator applies pressure — releasing the toggle returns it to its neutral position. On aerial work platforms, these switches are commonly used to direct functions that require deliberate, sustained input from the operator. When a toggle switch assembly wears out, develops contact corrosion, or fails internally, the affected function may become unresponsive, erratic, or unpredictable — conditions that must be corrected before the machine is returned to service. Replacing the assembly with the correct genuine OEM part, cross-referenced by part number 128200GT to your Genie parts manual, is the reliable path to restoring full control function.
Part Details
| Part Number | 128200GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Toggle Switch Assembly, SPDT 3P Momentary |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-2669BE | GS-2669BE |
| GS-3369BE | GS-3369BE |
| GS-4069BE | GS-4069BE |
| GS-2669DC | GS-2669DC |
| GS-3369DC | GS-3369DC |
| GS-4069DC | GS-4069DC |
| GS-2669RT | GS-2669RT |
| GS-3369RT | GS-3369RT |
| GS-4069RT | GS-4069RT |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z33/18 | Z33/18 |
| Z-62/40 | Z-62/40 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
| Z-45/25J IC | Z-45/25J IC |
| Z-34 IC | Z-34 IC |
| Z-30/20 | Z-30/20 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
