The Genie 83098GT is a genuine OEM AMP MTE Socket Terminal, 22-26 GA Bulk, designed for Genie S and SX series telescopic boom lifts and Z and ZX series articulating boom lifts. As a direct OEM replacement, this terminal is built to the exact connector specification used during original machine assembly, ensuring a correct, secure electrical connection every time. Cross-reference part number 83098GT against your machine's parts manual to confirm it is the right terminal for your specific unit before ordering.
Key Features
- Genuine OEM Electrical Spec — Manufactured to the original AMP MTE connector specification with the correct socket geometry and contact rating for 22–26 GA wire gauge, ensuring proper conductivity and contact retention.
- Direct Connector Replacement — This terminal seats into the original harness connector housing without rework, maintaining the integrity of the wiring circuit it serves.
- Broad Genie Boom Fitment — Compatible with a wide range of Genie S, SX, and Z series boom lifts, covering both telescopic and articulating boom platforms across multiple model variants.
- Maintains Circuit Integrity — A correctly crimped, properly seated terminal keeps electrical signals and power delivery consistent. A corroded or poorly fitted terminal can cause intermittent faults, control failures, or complete loss of function in the circuit it serves.
- Operational Safety — On aerial boom lifts, reliable electrical connections are directly tied to the performance of controls and safety systems. Using the correct OEM terminal helps ensure those circuits function as designed.
A socket terminal is the female contact element crimped onto a wire and inserted into a multi-pin connector housing. It makes and holds the electrical contact between two mating connectors in a machine's wiring harness. On boom lifts, connector terminals are used throughout control, sensor, and power circuits — a damaged, corroded, or missing terminal can cause anything from an intermittent signal fault to a complete loss of function for the circuit it serves. Replacing a failed terminal with the correct OEM part restores the original connection geometry and contact pressure, keeping the circuit performing as intended.
Part Details
| Part Number | 83098GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | AMP MTE Socket Terminal, 22-26 GA Bulk |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-100HD | S-100HD |
| S-120HD | S-120HD |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-3800 | S-3800 |
| S-3200 | S-3200 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| S-60 HC | S-60 HC |
| Z-60/34 | Z-60/34 |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-62/40 | Z-62/40 |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-45/25J IC | Z-45/25J IC |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
