TERMINAL, PIN, DT, 14-18 AWG, NICKEL, 0.095-0.150 OD, DEUTSCH, STRIP
Genie

TERMINAL, PIN, DT, 14-18 AWG, NICKEL, 0.095-0.150 OD, DEUTSCH, STRIP

$1.25
(No reviews yet) Write a Review
SKU:
73713GT-Genie
Adding... The item has been added

The Genie 73713GT Pin Terminal, DT, 14-18 AWG, Nickel is a genuine OEM Deutsch DT-series connector pin built for Genie S and Z series boom lifts, GTH telehandlers, and TZ trailer-mounted booms. Sourced directly from Genie, this pin terminal is manufactured to the exact crimp range, wire gauge, and plating specification called out in the OEM parts manual. It fits a broad range of Genie equipment — including S-40, S-60 XC, S-85, Z-45/25J Bi-Energy, Z-135/70, ZX-135/70, GTH-4016R IIIB, and GTH-5021 R, among others — making it a smart stocking item for fleets running multiple Genie models. Always cross-reference part number 73713GT against your machine's parts manual to confirm it is the correct terminal for your specific connector position.

Key Features

  • Genuine OEM Deutsch DT Specification — Nickel-plated contact surface and 0.095–0.150 OD crimp barrel match the exact Deutsch DT connector specification Genie calls out, ensuring secure mating and consistent contact resistance.
  • Correct Wire Gauge Range — Rated for 14–18 AWG wire, this terminal accepts the wire sizes used in Genie machine harnesses without over-crimping or under-crimping the conductor.
  • Direct OEM Replacement — Replaces the original terminal pin for pin, with no modification to the existing connector housing or wiring harness required.
  • Broad Multi-Family Fitment — A single part number covers S and Z series boom lifts, GTH telehandlers, and TZ trailer-mounted booms, reducing the number of unique connector components needed in your parts inventory.
  • Electrical Connection Integrity — A properly crimped, correctly specified pin maintains a low-resistance, vibration-resistant connection. A corroded, damaged, or wrong-spec pin causes intermittent signals, fault codes, or complete loss of function in the circuit it serves.
  • Safety-Critical Circuit Reliability — Control and safety circuits on aerial lifts and telehandlers depend on clean, secure connector pins. Using the correct OEM-spec terminal helps ensure those circuits perform as designed.

A pin terminal is the individual crimp contact that inserts into a multi-pin connector housing — in this case a Deutsch DT-series plug or receptacle widely used in Genie machine wiring harnesses. The pin is crimped onto a stripped wire conductor, then locked into the connector body to form a sealed, vibration-resistant electrical junction. When a pin terminal corrodes, pulls back in the housing, or is crimped to the wrong wire gauge, the circuit it carries can drop out intermittently or fail entirely, triggering fault conditions or disabling a function. Replacing a damaged or suspect terminal with the correct OEM Genie part restores the connection to its original specification and eliminates a common source of electrical gremlins on the machine.

Part Details

Part Number73713GT
BrandGenie
Part TypeGenuine OEM
DescriptionPin Terminal, DT, 14-18 AWG, Nickel, 0.095-0.150 OD, Deutsch, Strip

Compatibility & Fitment

Name Model
S-60 S-60
S-65 S-65
S-60X S-60X
S-60 XC S-60 XC
S-60 HC S-60 HC
S-60 TRAX S-60 TRAX
S-65 TRAX S-65 TRAX
S-65 XC S-65 XC
S-60 HF S-60 HF
S-65 HF S-65 HF
S-40 S-40
S-45 S-45
S-60 J S-60 J
S-80 S-80
S-85 S-85
GTH-4016R IIIB GTH-4016R IIIB
GTH-4018R IIIB GTH-4018R IIIB
GTH-5021 R GTH-5021 R
GTH-5021 R IIIA GTH-5021 R IIIA
GTH-4016R IIIA GTH-4016R IIIA
GTH-4018R IIIA GTH-4018R IIIA
TZ-34/20 TZ-34/20
TZ-50 TZ-50
Z-60/34 Z-60/34
Z-34/22 N Z-34/22 N
Z-34/22 DC Z-34/22 DC
Z-34/22 Bi-Energy Z-34/22 Bi-Energy
Z-135/70 Z-135/70
Z-51/30J Z-51/30J
Z-45/25 Z-45/25
Z-45/25J IC Power Z-45/25J IC Power
Z-45/25J DC Z-45/25J DC
Z-45/25J Bi-Energy Z-45/25J Bi-Energy
Z-30/20 N Z-30/20 N
Z-30/20N RJ Z-30/20N RJ
ZX-135/70 ZX-135/70
Z-45 XC Z-45 XC
Z-34/22 IC Z-34/22 IC
Z-45/25 IC Z-45/25 IC
Z-45/25J IC Z-45/25J IC
Z-34 IC Z-34 IC
Z-80/60 Z-80/60

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.