The Genie 56.0013.0000GT is a genuine OEM Hydraulic Oil Temperature Sensor designed for Genie GTH series telehandlers. Sourced directly from Genie, this sensor delivers the exact fit, connector compatibility, and calibration required by the GTH platform — covering a wide range of variants including the GTH-5519, GTH-4014 IIIA, GTH-4014 IIIB, GTH-3007, GTH-2506, GTH-1256, and many additional IIIA, IIIB, AU, and SX configurations. As a genuine OEM component, it meets the original engineering specification for hydraulic system monitoring, giving you confidence that the replacement performs exactly as the factory intended. Verify part number 56.0013.0000GT against your machine's parts manual to confirm fitment for your specific model and serial range before ordering.
Key Features
- Calibrated to OEM Specification — Matches the original sensor's temperature range, signal output, and electrical characteristics for accurate hydraulic oil monitoring on GTH telehandlers.
- Direct Connector and Thread Match — Engineered to the original mounting and wiring configuration, allowing straightforward installation without adapters or modification to the hydraulic circuit.
- Broad GTH Fitment Coverage — Compatible with a wide range of Genie GTH telehandler variants, including IIIA, IIIB, AU, SX, ACF, FMS, and R-suffix models across the GTH-2506, GTH-3007, GTH-4014, GTH-4018, GTH-5021, and GTH-5519 families.
- Protects the Hydraulic System — Accurate temperature data allows the machine's control system to alert operators to overheating conditions before they cause pump, valve, or cylinder damage.
- Operational Safety Relevance — On aerial and lifting equipment, undetected hydraulic overheating can affect load-handling performance and system integrity; a correctly functioning sensor keeps the operator informed and the machine within safe operating parameters.
A hydraulic oil temperature sensor monitors the heat level of the fluid circulating through a machine's hydraulic system and relays that data to the control system or instrument panel. In telehandlers like the GTH series, where hydraulic circuits power lifting, tilting, and extending functions under demanding load cycles, keeping oil temperature within the correct operating range is essential to maintaining fluid viscosity, seal integrity, and overall system efficiency. When the sensor fails or reads inaccurately, the machine may not alert the operator to rising temperatures, increasing the risk of fluid degradation, component wear, or unplanned shutdowns during operation.
Part Details
| Part Number | 56.0013.0000GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hydraulic Oil Temperature Sensor |
Compatibility & Fitment
| Name | Model |
|---|---|
| GTH-5519 | GTH-5519 |
| GTH-4014 IIIA | GTH-4014 IIIA |
| GTH-4014 IIIB | GTH-4014 IIIB |
| GTH-4018 IIIA | GTH-4018 IIIA |
| GTH-4018 IIIB | GTH-4018 IIIB |
| GTH-4016R IIIB | GTH-4016R IIIB |
| GTH-4018R IIIB | GTH-4018R IIIB |
| GTH-4014 AU | GTH-4014 AU |
| GTH-4018 AU | GTH-4018 AU |
| GTH-3007 IIIA | GTH-3007 IIIA |
| GTH-3007 IIIB | GTH-3007 IIIB |
| GTH-1256 AF | GTH-1256 AF |
| GTH-5021 R | GTH-5021 R |
| GTH-5021 R IIIA | GTH-5021 R IIIA |
| GTH-2506 | GTH-2506 |
| GTH-4016R IIIA | GTH-4016R IIIA |
| GTH-4018R IIIA | GTH-4018R IIIA |
| GTH-2506 AU.3 | GTH-2506 AU.3 |
| GTH-3007 | GTH-3007 |
| GTH-3007 AU.3 | GTH-3007 AU.3 |
| GTH-5519 S | GTH-5519 S |
| GTH-2506 AU.2 | GTH-2506 AU.2 |
| GTH-3007 AU.2 | GTH-3007 AU.2 |
| GTH-3007 AU-AG | GTH-3007 AU-AG |
| GTH-3512SX | GTH-3512SX |
| GTH-4010SX | GTH-4010SX |
| GTH-3007 FMS | GTH-3007 FMS |
| GTH-1544 | GTH-1544 |
| GTH-2506 IIIA | GTH-2506 IIIA |
| GTH-2506 IIIB | GTH-2506 IIIB |
| GTH-1256 | GTH-1256 |
| GTH-2506 AU | GTH-2506 AU |
| GTH-3007 ACF | GTH-3007 ACF |
| GTH-3512 ACF | GTH-3512 ACF |
| GTH-3713 SX | GTH-3713 SX |
| GTH-3713 AU | GTH-3713 AU |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
