Genie 04.0605.1684GT Double Hose, 1/2 - FD - R.SPEC. 180°

The Genie 04.0605.1684GT is a genuine OEM Double Hose, 1/2 - FD - R.SPEC. 180° designed for the GTH-3007 series telehandlers, including the GTH-3007 IIIA, GTH-3007 IIIB, GTH-3007, and GTH-3007 AU.3 variants. As a direct OEM replacement, this hose assembly is produced to the same specification as the original, ensuring correct port alignment, connection type, and routing geometry for a proper installation. Cross-reference part number 04.0605.1684GT against your GTH-3007 parts manual to confirm this is the correct assembly for your machine's hydraulic circuit before ordering.

Key Features

• OEM Hydraulic Specification — Built to Genie's original pressure rating, hose diameter, and end-fitting spec for the GTH-3007 hydraulic system — no guesswork on compatibility.
• 180° End Configuration — The R.SPEC. 180° geometry matches the original routing path exactly, allowing the assembly to seat correctly at both connection points without stressing fittings or adapters.
• 1/2" FD Female Disconnect Fittings — Correct 1/2-inch flat-face disconnect fittings maintain a clean, leak-resistant seal at each port, consistent with the GTH-3007's hydraulic plumbing standard.
• Broad GTH-3007 Variant Coverage — Fits the GTH-3007 IIIA, GTH-3007 IIIB, GTH-3007, and GTH-3007 AU.3, covering the full range of Stage IIIA, Stage IIIB, and Australian-spec variants of this telehandler model.
• Hydraulic Integrity Under Load — A correctly functioning hose assembly maintains consistent flow and pressure to the telescopic boom and attachment circuits, keeping lift, extend, and auxiliary functions performing as intended during material-handling tasks.
• Operational Safety — Hydraulic hose failure on a telehandler can cause sudden loss of boom control or attachment function at height. Replacing a worn or damaged hose with a genuine OEM assembly restores the original pressure containment rating and reduces the risk of uncontrolled movement.

A double hose assembly combines two hydraulic lines into a single routed unit, supplying pressurized fluid to and returning it from a specific function in the telehandler's hydraulic circuit — typically a boom cylinder, attachment circuit, or auxiliary function. The 180° end configuration means the inlet and outlet fittings face in opposite directions, which is critical for fitting the hose correctly within the machine's frame routing without kinking or misaligning connections. When a hose degrades — through cracking, abrasion, or fitting wear — it can weep fluid under pressure or fail outright, resulting in sluggish or unresponsive boom movement and potential hydraulic contamination that affects the entire system.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.