okay that's good that's great there's a perfect chance to tighten up that oil drain plug

okay everything down here is done we'll upgrade the machine

okay what's left oil level oil level is checked right here there's a clear sight glass most of the time it's clear

if not they're replaceable costs about 11 the oil level should be halfway up your sight glass

okay here's how to change the oil or here's how to install the oil on this particular machine on the older machines

there was a plug somewhere around here and that was the way to fill the oil on the bs 600 700 60 70 dash twos uh the oil drain

oil fill is right in here below the air filter

remove our cover remove our filter and i'll show you right here

that plug right there that plug has threads on the top that's what accepts the top of this

cover that's what contains the filter cover but when you remove it this is also where you throw your oil

this is a 19 millimeter plug remove the plug and you'll see there's a little copper

gasket make sure that gasket is in place when you go to put it all together otherwise you may leak

grab our oil in our funnel

add about a half a quart give it a minute to get down there check your sight glass

when it's about halfway in your sight glass go ahead and button this up remove your funnel

and your plug back in start the machine and let it run while jumping if you just let it idle

you're not going to accomplish anything let it jump for a couple of minutes and then let it sit for five minutes then check your oil level and your sight glass again

and adjust as needed