The Wacker Neuson Starter Rope is a genuine OEM component designed for a range of Wacker Neuson vibratory plate compactors, generators, and demolition equipment. This rope is a direct replacement for worn or snapped pull-start cords across the VP1340R, VP1340RW, VP1550R, VP1550RW, VP2050R, VP2050RW, AP1550R, and BPU 2540 vibratory plate families, as well as the GH3500 generator and TEH 1 demolition set. As a genuine Wacker Neuson OEM part, the is manufactured to the same specifications as the original, ensuring a proper fit in the recoil starter housing with no guesswork. Keep a replacement starter rope on hand to avoid unnecessary interruptions during compaction or demolition operations.
Key Features
- Correct Rope Diameter and Length — Manufactured to OEM specification, this starter rope matches the original pull-start cord profile for smooth, consistent engagement with the recoil starter mechanism.
- Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, part number 5000158429 meets the same material and tensile standards as the rope installed at the factory.
- Wide Fitment Across Multiple Equipment Families — Compatible with VP, AP, and BPU series vibratory plate compactors, the GH3500 generator, and the TEH 1 demolition set — a high-utility replacement rope for mixed Wacker Neuson fleets.
- Restores Reliable Pull-Start Function — A frayed or snapped starter rope makes it impossible to fire up the engine. Replacing it with the correct OEM cord restores full manual starting capability immediately.
- Built to Withstand Repeated Pull Loads — Recoil starters take repeated high-tension pulls under field conditions; this rope is built from durable cordage material that resists fraying and UV degradation over its service life.
The starter rope is the cord that connects the pull handle to the recoil starter mechanism inside the engine's starting assembly. When you pull the handle, the rope winds around the starter pulley and spins the engine crankshaft to initiate combustion. Over time, repeated pulling and exposure to heat, oil mist, and UV light cause the rope to fray, weaken, or snap entirely — leaving the machine unable to start. Replacing the starter rope is a straightforward service task that restores the machine's starting system to full working order without the need to replace the entire recoil starter assembly.
Part Details
| Part Number | 5000158429 |
|---|---|
| Old Part Number | 0158429 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Starter Rope |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Single Direction Plates | AP1550R | 5000009538 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
