The Wacker Neuson Idle Jet is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including PT2 trash pumps, CT36-6 concrete trowels, GP2600 portable generators, PDT2/PDT3 diaphragm pumps, PG2/PG3 dewatering pumps, and the extensive VP and WP single-direction vibratory plate family. As a factory-sourced OEM part, the is manufactured to the exact specification of the original component it replaces, ensuring a direct, hassle-free installation. This idle jet is a critical carburetor component that governs fuel delivery at low engine speeds, and using the correct replacement keeps affected machines running smoothly at idle without hunting, stalling, or rough transitions. Confirm your model number against the fitment list before ordering to ensure compatibility with your specific machine configuration.
Key Features
- Genuine OEM Fuel Metering Precision — Manufactured to the exact orifice size and flow specification of the original carburetor jet, ensuring correct fuel-to-air ratio at idle across all compatible engines.
- Direct Carburetor Installation — Threads directly into the carburetor body in place of the original jet with no machining or adaptation; designed to seat and seal correctly on the first install.
- Broad Cross-Family Fitment — A single OEM part number covering VP and WP vibratory plates, PT2 and PDT/PDI trash and diaphragm pumps, PG dewatering pumps, GP2600 generators, CT36-6 trowels, and BFS floor saws.
- Stable Idle and Clean Throttle Response — A correctly sized idle jet prevents lean stumbles, rough idle, and stalling at low RPM, allowing the engine to transition cleanly to full working speed under load.
- Fuel System Integrity — Using the correctly rated OEM jet helps maintain proper fuel delivery balance, reducing the risk of carburetor flooding, lean-run damage, or excessive fuel consumption caused by an incorrect orifice size.
The idle jet is a small brass metering component located inside the carburetor that controls the amount of fuel delivered to the engine during low-speed and idle operation. At idle, the main jet is largely inactive, so the idle jet is solely responsible for maintaining the correct fuel mixture — if it becomes clogged, worn, or incorrectly sized, the engine will stall, run roughly, or fail to hold a steady idle. Replacing a faulty or blocked idle jet with the correct OEM part restores proper carburetor function and is often the most direct fix for persistent idle and low-speed running issues.
Part Details
| Part Number | 5000156548 |
|---|---|
| Old Part Number | 0156548 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Idle Jet |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT2 Pump | PT2 | 5000009318, 5000009319, 5000009320 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| VP1340W VIBROPLATE | VP1340W | 5000008706, 5000630051 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013, 5000630053 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705, 5000630050 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000630018, 5000009547, 5000630066 |
| VP1550 VIBROPLATE | VP1550 | 5000008707, 5000630052 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630020, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| WP 2050W | WP2050W | 5000630023 |
| WPP 1540W | WPP1540W | 5000630027 |
| WPP 1550W | WPP1550W | 5000630031 |
| WPP 1550Ww | WPP1550Ww | 5000630032 |
| Single Direction Plate | AP1135R | 5000009518 |
| WPP 1540Ww | WPP1540Ww | 5000630028 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Direction Plate | WP1550Ww | 5000630113 |
| Single Direction Plate | WP2050Ww | 5000630116 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| Floor Saw | BFS 12 | 5000630092 |
| Single Direction Plate | WP1540Ww | 5000630111 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
