The Wacker Neuson Filter is a genuine OEM Filter designed for a wide range of Wacker Neuson equipment, including CRT48 ride-on trowels, CT36 and CT48 walk-behind trowels, PT2A and PT3A centrifugal trash pumps, GP and GPS portable generators, BPU reversible vibratory plates, VP and WP single-direction vibratory plates, BFS floor saws, and several additional machine families. As a genuine OEM part, it is manufactured to the same specification as the original component fitted at the factory. With fitment spanning concrete finishing, pumping, power generation, compaction, and cutting equipment, part number is a high-demand service item worth keeping on hand for multi-machine fleets.
Key Features
- Genuine OEM Filtration Media — Manufactured by Wacker Neuson to the exact porosity and flow-rate specification of the original, ensuring consistent contaminant capture without restricting system performance.
- Direct Drop-In Replacement — Matches the original mounting interface and dimensions, so installation follows the same service procedure as the factory-fitted filter with no modification to housings or fittings.
- Broad Cross-Family Fitment — A single part number covers CRT48 and CT-series trowels, PT2A/PT3A trash pumps, GP/GPS portable generators, BPU/VP/WP compaction plates, BFS floor saws, and additional Wacker Neuson equipment families.
- Protects Critical Internal Components — A clean, unobstructed filter maintains proper fluid or air flow, preventing accelerated wear on downstream components caused by contamination or flow restriction.
- Verified Wacker Neuson Part Number — Ordering by OEM part number 5000125834 eliminates substitution risk and ensures the correct filter reaches the right machine every time.
A filter's job is to remove contaminants — whether from air, fuel, oil, or hydraulic fluid — before they reach sensitive internal components such as carburetors, fuel injectors, or pump valves. When a filter becomes clogged or is replaced with an incorrect substitute, flow restriction increases, system efficiency drops, and components downstream are exposed to particles that accelerate wear. Replacing the filter at the manufacturer's recommended intervals with a correctly specified part like the Wacker Neuson 5000125834 is one of the most straightforward ways to extend service life across the wide range of equipment this part supports.
Part Details
| Part Number | 5000125834 |
|---|---|
| Old Part Number | 0125834 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Filter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000009098, 5000009101, 5000009240, 5000620800 |
| CT36-5A | CT36-5A EU | 5000620829 |
| PT2A Pump | PT2A | 5000009092, 5000009095, 5000009237, 5000006720, 5000006721 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| GPS5600A,CAN GFI | GPS5600A | 5000620096, 5000620383, 5000620328, 5000620044, 5000620093, 5000620013, 5000620981 |
| GPS6600A GENERATOR,CAN GFI | GPS6600A | 5000620102, 5000620386, 5000620331, 5000620047, 5000620099, 5000620016 |
| Portable Generator | GP3800A | 5000620104, 5000620379, 5000620485, 5000620342, 5000620484, 5000620041, 5000620103, 5000620010 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| Premium Portable Generator | GP5600A | 5000620094, 5000620095, 5000620326, 5000620327, 5000620381, 5000620382, 5000620042, 5000620043, 5000620091, 5000620092, 5000620011, 5000620012 |
| GP6600A GENERATOR,CAN GFI | GP6600A | 5000620100, 5000620101, 5000620329, 5000620330, 5000620384, 5000620045, 5000620046, 5000620097, 5000620098, 5000620014, 5000620015 |
| Premium Portable Generator | GP6600 | 5000620385 |
| GP2500A | GP2500A | 5000620128, 5200002844, 5000620009 |
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611, 5000620769 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616, 5000620773 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007628, 5000007629, 5000009407, 5000620775 |
| G 7AI | G7AI | 5000009104 |
| PG2A | PG2A | 5000009054 |
| PG3A | PG3A | 5000009055 |
| Self-propelled Walk-behind Saw | BFS 1318AS | 5000620085 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| Backpack Vibrator | BV50A-P | 5000620399, 5000620764, 5000620767 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| Backpack Vibrator | BV50A-P EU | 5000620892 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP1340A VIBROPLATE | VP1340A | 5000009031, 5000630057 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| GPS6600A Generator, CSA | GPS6600 | 5000620988 |
| Single Direction Plate | VPH70 | 5000006907 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Modular Internal Vibrators | HD 3.7 | 5000006906 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| Vibratory Plate | VPA1750 | 5000006792 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| Power Buggy | WB16AE | 5000009284, 5000009042, 5000009266 |
| Power Buggy | WB16AEF | 5000009290, 5000009046, 5000009272 |
| Power Buggy | WB16AES | 5000009291, 5000009047, 5000009273 |
| Power Buggy | WB16AEFS | 5000009296, 5000009052, 5000009278 |
| Single Direction Plates | AP1550A | 5000009539 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| BPU 3050A | BPU 3050A | 5000008763 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| BPU2540A | BPU 2540A | 5000008758 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| 50Hz Portable Value Generator | GV7003A | 5000009354, 5000009359 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| 50Hz Portable Value Generator | GV5003A | 5000009352, 5000009357 |
| 50Hz Portable Value Generator | GV7000A | 5000009358, 5000009363 |
| Floor Saws | BFS 614AB | 5000009527 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751 |
| Power Buggy | WB16ADE | 5000009287, 5000009044 |
| Power Buggy | WB16ADEF | 5000009293, 5000009049 |
| 50Hz Portable Value Generator | GV2500A | 5000009355, 5000009360, 5000620542, 5000620286 |
| 50Hz Portable Value Generator | GV5000A | 5000009356 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Value Generator | GV3800A | 5000620409, 5000620287, 5000620334 |
| Value Generator | GV5600A | 5000620410, 5000620288, 5000620335 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| BV50A-H Backpack Vibrator | BV50A-H | 5200016908 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Power Buggy | WB16ADES | 5000009050 |
| Power Buggy | WB16ADEFS | 5000009053 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Vibratory plate BPU 4045A | BPU 4045A | 5000610345 |
| BPU3545A-VIBROPLATE | BPU 3545A US | 5000610362 |
| BPU4045A-VIBROPLATE | BPU 4045A US | 5000610403 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| Value Generator, 60Hz | GV6600A | 5000620289, 5000620336 |
| GP3800A Generator, EPA | GP3800 | 5000620974, 5000620975, 5000620976 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.