The Wacker Neuson Choke Shaft Set is a genuine OEM component designed for a wide range of Wacker Neuson equipment including CRT48-34V ride-on concrete trowels, CT48-13A-V walk-behind trowels, BFS series floor saws, WB16A power buggies, BPU 5045A and BPU 5545A reversible vibratory plates, and GS5.5A and G7AI generators. As a factory-sourced part, it is manufactured to the exact tolerances and material specifications established for the original production run. This set is the correct service replacement when the choke shaft assembly is worn, damaged, or missing from the engine's air intake system. Verify your machine's model number against the fitment list to confirm compatibility before ordering.
Key Features
- Genuine OEM Construction: — Sourced directly from Wacker Neuson, this choke shaft set matches the original shaft geometry and material grade — ensuring correct choke plate travel and a proper seal across the carburetor bore.
- Direct-Fit Replacement: — Engineered to drop into the existing carburetor housing without rework; shaft diameter, length, and detent positions are identical to the part it replaces.
- Broad Equipment Compatibility: — Confirmed fitment across CRT48-34V and CT48-13A-V concrete trowels, the full BFS floor saw range, WB16A-series power buggies, BPU 5045A and BPU 5545A vibratory plates, and GS5.5A and G7AI generators.
- Consistent Cold-Start Performance: — A correctly functioning choke shaft allows the operator to fully restrict airflow for cold starts and fully open it for normal running; a bent or seized shaft leads to hard starting, rough idle, and excess fuel consumption.
- Fuel System Integrity: — Because the choke shaft seals against the carburetor body, a worn or damaged shaft can cause unmetered air ingestion and uncontrolled fuel draw — replacing it promptly restores correct air-fuel ratio and safe engine operation.
The choke shaft is the rotating spindle that carries the choke plate inside the carburetor's air intake bore. When the operator moves the choke lever, the shaft pivots to open or close the plate, controlling how much air enters the engine — a critical function for cold starting and warm-up enrichment. Over time the shaft can wear at its bore contacts, corrode, or become seized, causing the choke to stick open or closed; a stuck-closed choke floods the engine, while a stuck-open choke makes cold starts difficult or impossible. Replacing the complete Choke Shaft Set restores smooth, full-range choke movement and consistent engine starting across all operating temperatures.
Part Details
| Part Number | 5000082825 |
|---|---|
| Old Part Number | 0082825 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Choke Shaft Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 1220mm/48in Ride-on Trowel | CRT48-34V | 5000620805, 5000620075, 5200004935 |
| CT48-13A-V Trowel | CT48-13A-V | 5000009452, 5000620836 |
| G 7AI | G7AI | 5000009104 |
| Self-propelled Walk-behind Saw | BFS 1318AS | 5000620085 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| Power Buggy | WB16AE | 5000009284, 5000009042, 5000009266 |
| Power Buggy | WB16AEF | 5000009290, 5000009046, 5000009272 |
| Power Buggy | WB16AES | 5000009291, 5000009047, 5000009273 |
| Power Buggy | WB16AEFS | 5000009296, 5000009052, 5000009278 |
| Power Buggy | WB16A | 5000009282, 5000008021, 5000009264 |
| Power Buggy | WB16AF | 5000009285, 5000008288, 5000009267 |
| Power Buggy | WB16AS | 5000009286, 5000009043, 5000009268 |
| Power Buggy | WB16AFS | 5000009292, 5000009048, 5000009274 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Gasoline Floor Saw, Ø 450 (350 ) | BFS 100 | 5000007352 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751 |
| Power Buggy | WB16AD | 5000009283, 5000008022 |
| Power Buggy | WB16ADE | 5000009287, 5000009044 |
| Power Buggy | WB16ADF | 5000009288, 5000008289 |
| Power Buggy | WB16ADEF | 5000009293, 5000009049 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| 50Hz Portable Generator with E lectric Start | GS5.5A | 5000007105 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Power Buggy | WB16ADS | 5000009045 |
| Power Buggy | WB16ADES | 5000009050 |
| Power Buggy | WB16ADFS | 5000009051 |
| Power Buggy | WB16ADEFS | 5000009053 |
| BPU5545A-VIBROPLATE | BPU 5545A | 5000610346 |
| Vibratory Plate BPU 5545A US | BPU 5545A US | 5100000678 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
