The Wacker Neuson 5100011733 is a genuine OEM Angle Joint designed for the RD-series tandem rollers, covering a broad range of walk-behind and ride-on articulated models including the RD18, RD24, RD27, RD28, RD40, and RD45 families. Sourced directly from Wacker Neuson, this part meets the exact specifications of the original component it replaces. Fitment spans smooth-drum, combination, and open-drum configurations across standard, C, and O variants, making the 5100011733 one of the most widely applicable angle joint references in the RD roller lineup. Always confirm your machine's model number before ordering to ensure a correct match.
Key Features
- Genuine OEM Construction: — Manufactured to Wacker Neuson's original dimensional and material tolerances, ensuring the joint pivots and articulates with the same load capacity as the part it replaces.
- Drop-In Replacement: — Engineered to the original mounting geometry of the RD-series articulation system, so the joint connects directly without reworking brackets or linkage points.
- Broad RD-Series Coverage: — A single part number covers RD18, RD24, RD27, RD28, RD40, and RD45 tandem roller models across multiple drum configurations and regional variants, including US-spec machines.
- Maintains Steering Precision: — A correctly functioning angle joint preserves the articulation response and drum-tracking accuracy that tandem rollers depend on for uniform compaction passes on asphalt and soil.
- Structural Integrity Under Load: — Built to handle the continuous pivoting forces generated during roller operation, resisting wear and deformation that can develop in high-cycle articulation joints over time.
The angle joint is a load-bearing pivot component located in the articulation point of a tandem roller's steering system. It allows the front and rear drum sections to hinge relative to each other, giving the operator directional control during compaction passes. When the angle joint wears, becomes loose, or fails, the machine's articulation becomes sloppy or unresponsive, leading to uneven drum tracking, poor overlap control, and reduced compaction consistency across the mat.
Part Details
| Part Number | 5100011733 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Angle Joint |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD24-100 C Tandem Roller | RD24-100C US | 5100021757 |
| RD18-100 C Tandem Roller | RD18-100 C US | 5100027574 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD40-130 Tandem Roller | RD40-130 | 5100011391 |
| RD24-100 Tandem Roller | RD24-100 | 5100011385, 5100047374 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD 24-100.3 | RD 24-100.3 | 5100032197 |
| Vibration Roller | RD18-80 SE | 5100044988 |
| RD24-100c.3 | RD24-100c.3 | 5100047370 |
| RD45-140 Tandem Roller | RD45-140 | 5100011392 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RD24-100o.3 | RD24-100o.3 | 5100047372 |
| RD18-100 | RD18-100 | 5100047361, 5100055775, 5100011383 |
| RD24-100o | RD24-100o | 5100047378 |
| RD28-120 Tandem Roller | RD28-120 US | 5100021756 |
| RD18-100 C Tandem Roller | RD18-100 C | 5100011384 |
| RD28-120 | RD28-120 | 5100047375 |
| RD18-80.3 | RD18-80.3 | 5100055946 |
| RD18-100c | RD18-100c | 5100055776, 5100047362 |
| RD27-120 C Tandem Roller | RD27-120 C | 5100011388 |
| RD27-120 | RD 27-120.3 | 5100032198 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD18-80 | RD18-80 | 5100047360, 5100055774, 5100011382 |
| RD28-120c | RD28-120c | 5100047377 |
| RD24-100 O Tandem Roller | RD24-100 O | 5100011389 |
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD27-120o | RD27-120o.3 | 5100047373 |
| RD27-120c | RD27-120c.3 | 5100047371 |
| RD24-100 Tandem Roller | RD24-100 US | 5100021755 |
| RD24-100c | RD24-100c | 5100047376 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RD28-120 C Tandem Roller | RD28-120C US | 5100021758 |
| RD24-100 C Tandem Rollers | RD24-100 C | 5100011387 |
| Vibration Roller | RD18-100 SE | 5100044989 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD18-100c.3 | RD18-100c.3 | 5100055948 |
| RD24-100 O Tandem Roller | RD24-100O US | 5100021759 |
| RD27-120 Tandem Roller | RD27-120 | 5100011386 |
| RD18-80 Tandem Roller | RD18-80 US | 5100027572 |
| RD18 | RD18-100.3 | 5100055947 |
| RD28-120 O Tandem Roller | RD28-120O US | 5100021800 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
| RD18-100 Tandem Roller | RD18-100 US | 5100027573 |
| RD27-120 O Tandem Roller | RD27-120 O | 5100011390 |
| RD28-120o | RD28-120o | 5100047379 |
| Vibration Roller | RD18-100c 3 | 5100047363 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
