The Wacker Neuson 5100013493 Banjo is a genuine OEM component designed for the RD40-130 and RD45-140 series tandem rollers. Sourced directly from Wacker Neuson, this part meets the exact specifications of the original hardware installed at the factory. It fits across the full RD40-130 and RD45-140 model families, including standard, combination, open-drum, DPF-equipped, and regional US variants. When you need a verified, direct-replacement banjo fitting for your tandem roller, part number 5100013493 is the correct OEM choice.
Key Features
- OEM-Spec Flow Passage Geometry — Manufactured to the exact bore size and thread specification of the original, ensuring consistent fluid flow and a leak-free connection at installation.
- Direct Bolt-On Replacement — Matches the original mounting thread and port orientation on the RD40-130 and RD45-140 hydraulic or fuel circuit, allowing straightforward swap-out without reworking lines or fittings.
- Broad RD-Series Compatibility — Confirmed fitment across RD40-130 and RD45-140 variants including standard, C (combination), O (open), DPF, .3-revision, and US-market configurations.
- Maintains Circuit Integrity — A properly functioning banjo fitting keeps fluid routed at the correct pressure and volume; a cracked, cross-threaded, or worn banjo can cause leaks that disrupt hydraulic or fuel delivery and sideline the machine.
- Genuine Wacker Neuson Part — Supplied as an authentic OEM component, carrying the material and dimensional standards Wacker Neuson specifies for this fitting in their tandem roller line.
A banjo fitting is a hollow, bolt-style connector that allows fluid — typically hydraulic oil or fuel — to pass through the center of the bolt and into an adjoining port or hose, while maintaining a sealed, rotatable connection. On Wacker Neuson RD-series tandem rollers, banjo fittings are used where hose routing must change direction at a component port without adding bulk or stress to the line. When a banjo fitting fails — through cracking, thread damage, or seal deterioration at its sealing faces — it can cause fluid loss, pressure drop, or contamination that affects roller operation. Replacing a worn or damaged banjo with the correct OEM part restores a clean, sealed connection and prevents further fluid-system issues.
Part Details
| Part Number | 5100013493 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Banjo |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD45-140 DPF | RD45-140 DPF | 5100055778 |
| RD40-130 | RD40-130 | 5100047382, 5100011391 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD40-130 Tandem Roller | RD40-130 US | 5100021801 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RD45-140 C Tandem Roller | RD45-140C US | 5100021804 |
| RD45-140 Tandem Roller | RD45-140 US | 5100021802 |
| RD45-140o | RD45-140o | 5100047387 |
| RD45-140 | RD45-140 | 5100047383, 5100011392 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140c DPF | RD45-140c DPF | 5100055780 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD40-130c DPF | RD40-130c DPF | 5100055779 |
| RD40-130o DPF | RD40-130o DPF | 5100055781 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD45-140c | RD45-140c | 5100047385 |
| RD40-130 O Tandem Roller | RD40-130O US | 5100021805 |
| RD40-130 DPF | RD40-130 DPF | 5100055777 |
| RD40-130 C Tandem Roller | RD40-130C US | 5100021803 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD45-140 O Tandem Roller | RD45-140O US | 5100021806 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RD40-130c | RD40-130c | 5100047384 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD45-140o DPF | RD45-140o DPF | 5100055782 |
| RD40-130o | RD40-130o | 5100047386 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
