The Wacker Neuson Control Module Kit is a genuine OEM component designed for the E-series hydronic surface heaters and ground heaters, including the E1100, E1250, E2200, E3000, E3000ES, E5000, and Pureheat model lines. As a factory-sourced assembly, this kit meets the exact electrical and operational specifications Wacker Neuson built into these units, ensuring the control system performs as intended from installation onward. It covers an exceptionally wide range of configurations — from standard ground heaters to lift bail variants and generator-equipped models — making the correct kit across most E-series production runs. If your hydronic heater is showing erratic behavior, failing to ignite, or not responding to thermostat inputs, the control module is a primary diagnostic and replacement target.
Key Features
- Factory-Matched Electrical Specification — Sourced directly from Wacker Neuson, this kit carries the correct voltage ratings, relay logic, and sensor compatibility for E-series hydronic heating systems — no guesswork on electrical spec.
- Broad E-Series Coverage — A single kit number spans E1100, E1250, E2200, E3000, E3000ES, E5000, and Pureheat configurations, including ground heater, hydronic surface heater, lift bail, and generator-equipped variants.
- Direct-Swap Replacement — The 5000169298 kit is engineered to mount and connect using the existing wiring harness and mounting points on supported E-series machines, simplifying the swap during a service call.
- Restores Full Heating Control — A functioning control module manages burner ignition sequencing, temperature regulation, and safety shutoffs. A failed module can cause no-start conditions, erratic cycling, or loss of temperature control on critical cold-weather jobs.
- Safety-Critical Electrical Component — The control module governs the heater's ignition and safety shutoff circuits. Using a genuine OEM kit ensures these protection functions operate within the parameters Wacker Neuson validated for field use.
The control module is the electronic brain of the Wacker Neuson E-series hydronic heater. It manages the ignition sequence, monitors operating temperatures, and commands the burner and pump circuits based on thermostat demand — essentially coordinating every stage of the heating cycle. When the module degrades or fails, the heater may refuse to start, cycle off prematurely, or lose the ability to maintain a set temperature, which on a winter concrete curing or ground thawing application can mean costly delays and compromised work. Replacing it with the correct OEM kit restores the full control logic the machine was designed to operate on.
Part Details
| Part Number | 5000169298 |
|---|---|
| Old Part Number | 0169298 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Control Module Kit |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/DIESEL BURNER | E5000 | 5000620897, 5000620899 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620190 |
| E1250S | E1250S | 5200012355 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5000620244, 5200001676 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| E12540B | E1250B | 5200012353 |
| E 1250P Hydronic Heater, Premium, Diesel | E1250P | 5200012357 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
