The Wacker Neuson 5100008856 Bush is a genuine OEM component designed for the DPU 80, DPU 90, DPU 110, and DPU 130 series reversible vibratory plate compactors. As a direct OEM replacement, part 5100008856 is manufactured to the exact tolerances required by Wacker Neuson for proper fit and function within these machines. This Bush is confirmed compatible across a wide range of DPU variants including DPU80Lec, DPU90Lec, DPU110Lec, DPU80Lem, DPU90Lem, DPU110Lem, DPU110rLec, DPU110rLem, DPU80rLec, DPU80rLem, DPU110Lekc, and DPU 130Le configurations. Sourcing the correct OEM part is critical on reversible plate compactors, where internal components must meet precise dimensional specs to maintain compaction force and directional control.
Key Features
- Genuine OEM Dimensional Accuracy — Manufactured to Wacker Neuson's exact bore and outer-diameter tolerances, ensuring the bush seats correctly and maintains proper shaft alignment within the compactor drivetrain.
- Direct Drop-In Replacement — Engineered to install in the same position as the original, with no reworking of mounting points or adjacent components required.
- Broad DPU Series Coverage — Fits DPU 80, 90, 110, and 130 series reversible plate compactors across multiple engine and configuration variants, including Lec, Lem, rLec, rLem, and Lekc designations.
- Preserves Drivetrain Integrity — A worn or out-of-spec bush allows excessive play at the shaft, leading to accelerated wear on surrounding components and loss of consistent compaction output.
- OEM Part Number Confidence — Ordering by Wacker Neuson part number 5100008856 ensures you receive the correct component for your specific DPU model, eliminating the risk of dimensional mismatch.
A bush is a plain bearing or sleeve that supports a rotating or sliding shaft, reducing friction and absorbing radial load between two mating surfaces. In a reversible vibratory plate compactor, bushes are used at key pivot and drive points to maintain alignment and allow smooth relative movement under the high-vibration loads generated during compaction. When a bush wears beyond its service limit, it introduces play into the drivetrain, which can cause uneven vibration, increased stress on shafts and housings, and eventual damage to more costly surrounding components. Replacing a worn bush promptly restores correct clearances and protects the broader assembly.
Part Details
| Part Number | 5100008856 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bush |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU 130Le | DPU 130Le | 5000610143 |
| DPU130Le | DPU130Le CH/US | 5000610424 |
| DPU80Lec670 | DPU80Lec670 | 5100027032 |
| DPU110Lec970 | DPU110Lec970 | 5100027035 |
| DPU90Lec770 | DPU90Lec770 | 5100027536 |
| DPU80Lec770 | DPU80Lec770 | 5100026787 |
| DPU90Lec670 | DPU90Lec670 | 5100027534 |
| DPU110Lec870 | DPU110Lec870 | 5100026869 |
| DPU80rLec670 | DPU80rLec670 | 5100027033 |
| DPU80Lem670 | DPU80Lem670 | 5100024695 |
| DPU110Lem970 | DPU110Lem970 | 5100024696 |
| DPU90Lec770 US | DPU90Lec770 US | 5100028357 |
| DPU80rLec770 | DPU80rLec770 | 5100027034 |
| DPU110Lec970 US | DPU110Lec970 US | 5100026784 |
| DPU80Lem770 | DPU80Lem770 | 5100018444 |
| DPU110Lem870 | DPU110Lem870 | 5100018445 |
| DPU90Lem770 | DPU90Lem770 | 5100024731 |
| DPU80rLem770 | DPU80rLem770 | 5100024698 |
| DPU90Lem770 US | DPU90Lem770 US | 5100024732 |
| DPU110rLec870 | DPU110rLec870 | 5100027077 |
| DPU110rLec970 | DPU110rLec970 | 5100027036 |
| DPU80rLem670 | DPU80rLem670 | 5100024697 |
| DPU110Lem970 US | DPU110Lem970 US | 5100024730 |
| DPU90rLec770 US | DPU90rLec770 US | 5100028359 |
| DPU110rLem970 | DPU110rLem970 | 5100024699 |
| DPU110rLec970 US | DPU110rLec970 US | 5100026786 |
| DPU110rLem870 | DPU110rLem870 | 5100026697 |
| DPU110rLem970 US | DPU110rLem970 US | 5100026785 |
| DPU90rLem770 | DPU90rLem770 US | 5100028358 |
| DPU110Lekc970 | DPU110Lekc970 | 5100034515 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
