The Wacker Neuson 5100032258 Bush is a genuine OEM component designed for a wide range of Wacker Neuson vibratory rammers and vibratory plate compactors, including the BS50, BS60, BS70, BS72, BS65, BS68, BS62, DS70Y, and WP1540 series. As a direct OEM replacement, this bush is manufactured to the same specifications as the original part, ensuring correct dimensional fit and long-term performance within the machine's drive assembly. This genuine part covers an extensive fitment range across both gasoline and diesel rammer families, as well as WP-series single-direction vibratory plate compactors, making it a versatile stocking part for dealers and service technicians alike. Always verify your machine's model and serial number against the fitment list before ordering to confirm compatibility.
Key Features
- Genuine OEM Material Integrity — Manufactured to Wacker Neuson's original dimensional and hardness tolerances, ensuring the bush seats correctly and resists wear under the repetitive loading forces produced by vibratory rammers and plate compactors.
- Drop-In Installation — Engineered to match the original bore size and interface geometry, so the 5100032258 installs directly into the drive assembly without secondary machining or fitting adjustments.
- Broad Fitment Coverage — Confirmed for BS50, BS60, BS70, BS72, BS65, BS68, BS62, DS70Y, and WP1540 series machines, spanning both gasoline and diesel rammer variants as well as WP-series vibratory plate compactors.
- Drive Assembly Protection — A correctly sized bush maintains proper shaft alignment and absorbs rotational loading, helping to prevent accelerated wear on surrounding drive components and housing bores.
- Sourced from Wacker Neuson — Supplied as genuine OEM stock, meaning the part number, geometry, and material grade are verified against the original design — critical for a precision fit component like a bush.
A bush is a cylindrical sleeve fitted between two moving or mating components — in this case within the drive assembly of a vibratory rammer or plate compactor — to reduce friction, absorb vibration, and maintain accurate shaft or pin alignment. In rammers and plate compactors, where the mechanism operates under continuous high-frequency impact and oscillating loads, the bush acts as a sacrificial wear surface that protects the surrounding housing and shaft from direct metal-to-metal contact. When a bush wears excessively, it allows unwanted play in the drive assembly, which can cause noise, vibration irregularities, and accelerated damage to adjacent components if not addressed promptly.
Part Details
| Part Number | 5100032258 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bush |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| WP1540Aw | WP1540Aw | 5100018329 |
| WP1540Aw | WP1540Aw US | 5100018327 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| WP1540A | WP1540A US | 5100018328 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| WP1540A | WP1540A | 5100018330 |
| BS60-4As 11in | BS60-4As 11in | 5100037562, 5100030606, 5100051581 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2PLUS 11IN HA US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| DS70 | DS70Y 13in | 5100060830, 5100030612 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| BS60-2 11IN | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS50-2 11IN US | BS50-2 11in US | 5100030590 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS50-2 11'' | BS50-2 11in o. bsz | 5100068309 |
| Rammer BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| Rammer BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| BS50-2 10IN | BS50-2 10in | 5100058346 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| DS70 | DS70Y 13in LRC | 5100065736 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
