The Wacker Neuson Bushing is a genuine OEM component designed for a broad range of Wacker Neuson hydronic surface heaters, ground heaters, and indirect-fired air heaters, including the E3000, E2200, E1100, HSH700G, HSH650, HSH350, HI750, HI900, HI260, and Pureheat series. As a factory-sourced part, the meets the exact dimensional and material standards established for these heating systems, ensuring correct installation without modification. This bushing is compatible across an extensive lineup of ground heater and hydronic surface heater configurations, as well as indirect-fired air heater variants running on diesel, natural gas, and LP fuel sources. When a bushing wears or fails, it can compromise the mechanical integrity of the assembly it supports, making timely replacement with the correct OEM part essential to keeping your heating equipment operating at specification.
Key Features
- Genuine OEM Dimensional Accuracy — Manufactured to Wacker Neuson's exact bore and wall tolerances, ensuring correct load distribution and secure mechanical fit within the heater assembly.
- Direct-Replacement Fit — Drops into the same position as the original bushing with no reworking of mating components required across all compatible configurations.
- Broad Heater Family Coverage — Verified for E3000, E2200, E1100, HSH350, HSH650, HSH700G, HI260, HI750, HI900, Pureheat, and associated pump pack and skid-mounted variants.
- Supports Mechanical Stability — A correctly fitted bushing controls movement between mating components, preventing accelerated wear on surrounding parts and maintaining alignment under operating loads.
- Sourced Direct from Wacker Neuson — Supplied as a factory OEM part, so the part number, material specification, and geometry match the original component installed at the time of manufacture.
A bushing is a cylindrical sleeve that sits between two moving or load-bearing components, providing a controlled bearing surface that reduces friction and prevents direct metal-to-metal contact. In heating equipment such as the E3000 ground heaters and HI750 indirect-fired air heaters, bushings are used to maintain proper alignment and absorb operational stresses within mechanical assemblies like pump drives, fan mounts, or pivot points. When a bushing wears thin or seizes, it allows excessive play between components, which can cause noise, vibration, and accelerated damage to the parts it is meant to protect — making replacement with the correct-specification bushing a straightforward but important service step.
Part Details
| Part Number | 5000168011 |
|---|---|
| Old Part Number | 0168011 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bushing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| HP252 | HP252 | 5000620249 |
| DPP33 Dual Pump Pack | DPP33 | 5000620429 |
| SPP4.4 Single Pump Pack | SPP4.4 | 5000620427 |
| DPP8.8 Dual Pump Pack | DPP8.8 | 5000620428 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190, 5000620220 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5000620244, 5200001676 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| Hydronic Surface Heater w/ Gen erator, 3000 ft hose | S3000 | 5000620218, 5000620182 |
| HSH650 | HSH650 | 5000620991 |
| HI750 DGM,SB HEATER-INDIRECT | HI750GM | 5000620930, 5000620859 |
| Mobile Indirect Fired Air Heat er, Diesel | HI750D | 5000620856, 5000620923, 5000620924 |
| HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 | HI750GMHD | 5000620969 |
| HI750G HEATER-INDIRECT | HI750G | 5000620857, 5000620928, 5000620929 |
| Hydronic Surface Heater, 700m hose | E700M | 5000620195 |
| HI900 Heater-DGM,Srg,-40 | HI900DGM | 5200014221, 5200014222, 5200014166 |
| HI 900D Heater-Indirect | HI900D | 5200014158, 5200014159, 5200014160 |
| Skid Indirect Air Heaters Natu ral Gas | HI900G | 5200014161 |
| HI 900G Heater-Indirect,3x16 | HI900 G | 5200014163, 5200014164 |
| HI260 HEATER,OIL WITH TANK | HI260 | 5200018503 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
