The Wacker Neuson Bushing is a genuine OEM component designed for a broad range of Wacker Neuson heating and surface conditioning equipment, including the E3000 Ground Heater, E2200 Hydronic Surface Heater, HI770XHD Indirect Air Heater, HSH700, HSH650, HI900D, and many related configurations across the E-series, HI-series, HSH-series, CUB, Pureheat, and Arctic Bear families. As a direct OEM replacement, this bushing is sourced from Wacker Neuson's authorized supply chain, ensuring it matches the original component specification exactly. Whether you are servicing a hydronic surface heater, an indirect-fired air heater, or a ground heater with integrated generator, this single part number covers a wide cross-section of the heating product lineup. Confirm your machine number against the fitment list to verify compatibility before ordering.
Key Features
- Genuine OEM Dimensional Accuracy — Manufactured to the original bore and wall tolerances Wacker Neuson specifies for this bushing position, ensuring correct load distribution and a secure fit within the housing.
- Drop-In Replacement — Matches the original mounting interface directly, allowing straightforward installation without reworking the surrounding assembly.
- Broad Heating Equipment Coverage — A single part number supports E-series ground and hydronic surface heaters, HI-series and Arctic Bear indirect air heaters, HSH hydronic surface heaters, CUB indirect heaters, Pureheat hydronic heaters, and the HI260 oil-fired heater with tank.
- Preserves Structural Integrity of the Assembly — A worn or failed bushing allows unwanted movement between components, leading to accelerated wear on adjacent parts and potential misalignment in the heater's mechanical assembly.
- Authorized OEM Part — Supplied through Wacker Neuson's genuine parts program, so you receive the same component that was installed at the time of manufacture.
A bushing is a cylindrical sleeve that fits between two mating components — typically a shaft or pin and its housing — to reduce friction, absorb load, and control the clearance between moving or fixed parts. In heating equipment like the E3000, HI770XHD, and HSH-series units, bushings are used at pivot points, mounting interfaces, and mechanical connection points throughout the frame and burner assembly. When a bushing wears down or fails, the affected joint develops excessive play, which can cause noise, vibration, accelerated wear on surrounding hardware, and ultimately mechanical failure of the broader assembly. Replacing a worn bushing promptly with the correct OEM part restores proper tolerances and protects the components around it.
Part Details
| Part Number | 5000168034 |
|---|---|
| Old Part Number | 0168034 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Bushing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HI 770 XHD Indirect Air Heater, Diesel, 2x12 | Arctic Bear XHD | 5000620676 |
| HI 770 XHD Indirect Air Heater, Diesel, 1x16 | HI770XHD | 5000620183, 5200003814, 5200004934, 5100049894 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/GAS BURNER | E5000 | 5000620898, 5000620897, 5000620899 |
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| Skid Mounted-Indirect Fired Ai r Heat, Diesel | CUB700 | 5000620213, 5000620687, 5000620207 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190 |
| HI770XHD Indirect Heater | Arctic Bear XHD NS | 5000620690 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| E1100 GROUND HEATER | E1100 | 5000620172 |
| Hydronic Surface Heater w/ Gen erator, 3000 ft hose | S3000 | 5000620218, 5000620182 |
| Skid Mounted-Indirect Fired Ai r Heater, Diesel | CUB400 | 5000620211, 5000620212, 5000620615 |
| HSH650 | HSH650 | 5000620991 |
| Mobile Drying System | MC5200 | 5000620201, 5000620232 |
| HI750 DGM HEATER-INDIRECT | HI750GM | 5000620859, 5000620930 |
| Mobile Indirect Fired Air Heat er, Diesel | HI750D | 5000620856, 5000620923, 5000620924 |
| HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 | HI750GMHD | 5000620969 |
| HI750G HEATER-INDIRECT | HI750G | 5000620857 |
| Factory-Installed Options | Factory-Installed Options | 5200004152 |
| Mobile Indirect Air Heater, Di esel | Arctic Bear HD | 5000620197 |
| Hydronic Surface Heater, 700m hose | E700M | 5000620195 |
| Mobile Indirect Fired Air Heat er, Diesel w/Genset | CUB700GM | 5000620759 |
| HI900 Heater-DGM,Srg,-40 | HI900DGM | 5200014221, 5200014222, 5200014165, 5200014166 |
| HI 900D Heater-Indirect | HI900D | 5200014158, 5200014159, 5200014160 |
| HI260 HEATER,OIL WITH TANK | HI260 | 5200018503 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
