The Wacker Neuson Clutch is a genuine OEM component designed for the E-series ground heaters, E-series hydronic surface heaters, HSH-series hydronic surface heaters, and associated hose handling systems. As a direct OEM replacement sourced through authorized Wacker Neuson supply channels, part number meets the exact design specifications of the original component. This clutch fits an extensive range of hydronic heating equipment including the E1100, E2200, E3000, E3000ES, E5000, E1250S, E1250B, E1250P, HSH350, HSH380B, HSH380S, HSH650, HSH700G, S3000, HHS-series hose handling systems, Pureheat, CH5000, and HP252 units.
Key Features
- Genuine OEM Engagement Integrity — Manufactured to the original torque-transfer specification, ensuring the clutch engages and releases with the same load characteristics as the factory-installed part.
- Direct Drop-In Replacement — Matches the original mounting interface and shaft dimensions of the 5000168104 position; installs without modification to brackets, housings, or adjacent drive components.
- Broad Hydronic Heater Compatibility — Confirmed fitment across E-series (E1100, E2200, E3000, E3000ES, E5000, E1250 variants), HSH-series (HSH350, HSH380B, HSH380S, HSH650, HSH700G), S3000, CH5000, HP252, Pureheat models, and the full HHS hose handling system range.
- Protects Drive Train Components — A properly functioning clutch prevents shock load transmission to the pump and motor; a worn or slipping clutch causes erratic fluid circulation, premature bearing wear, and potential pump failure.
- Fuel and Burner Configuration Agnostic — Covers diesel-burner, gas-burner, LP/NG, and generator-equipped variants within the same model families, so one part number services your entire hydronic heating fleet.
The clutch in a hydronic surface heater controls the mechanical connection between the drive motor and the circulation pump. When engaged, it transmits rotational force that drives heated fluid through the hose circuit to warm concrete slabs, ground thaw blankets, or curing enclosures. A clutch that slips or fails to fully engage reduces fluid flow rate, causing uneven heat distribution and putting excessive thermal load on the burner. Replacing a worn clutch with the correct OEM part restores full pump drive capacity and keeps the heating circuit operating at its designed output.
Part Details
| Part Number | 5000168104 |
|---|---|
| Old Part Number | 0168104 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Clutch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/GAS BURNER | E5000 | 5000620898, 5000620897, 5000620899 |
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| HP252 | HP252 | 5000620249 |
| HHS702 Hose Handling System | HHS702 | 5000620426 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190, 5000620220 |
| E1250S | E1250S | 5200012355, 5200012354 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5000620244, 5200001676 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| Hydronic Surface Heater w/ Gen erator, 3000 ft hose | S3000 | 5000620218, 5000620182 |
| E12540B | E1250B | 5200012353, 5200007613 |
| HSH650 | HSH650 | 5000620991 |
| HSH380s | HSH 380S | 5100054643 |
| E 1250P Hydronic Heater, Premium, Diesel | E1250P | 5200012357, 5200012356 |
| HSH380S-Diesel, with Generator | HSH380S | 5200012371, 5200012370 |
| HSH380B-Diesel, without generator | HSH380B | 5200012359, 5200007614 |
| Hydronic Surface Heater, 700m hose | E700M | 5000620195 |
| HHS2202 Hose Handling System | HHS2202 | 5000620423 |
| Hose Handling System | HHS2200 | 5000620418 |
| Hose Handling System | HHS3000 | 5000620419 |
| Hose Handling System | HHS700M | 5000620420 |
| Hose Handling System | HHS1101 | 5000620421 |
| HHS3002 Hose Handling System | HHS3002 | 5000620424 |
| HHS3004 Hose Handling System | HHS3004 | 5000620425 |
| HHS2502 Hose Handling System | HHS2502 | 5200003554 |
| Cross Heater with oil burner | CH5000 | 5000620240, 5000620242 |
| Hose Handling System | HHS1701 | 5000620422 |
| HHS1251 Hose Handling System | HHS1251 | 5200019011 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
