The Wacker Neuson 5100005604 is a genuine OEM Corrugated Head Screw designed for the DPU80, DPU90, and DPU110 series reversible vibratory plate compactors. As a direct Wacker Neuson OEM part, the 5100005604 is manufactured to the exact specification of the original hardware used in production, ensuring a correct installation every time. This fastener is compatible across a broad range of DPU configurations, including Lec, Lem, rLec, rLem, and KMAT variants, covering both standard and US-market models. If your machine is due for service or a worn fastener needs replacement, this is the part to order.
Key Features
- OEM-Spec Thread Form and Head Profile — Manufactured to exact corrugated head geometry, ensuring the screw seats and locks correctly in its mating surface without stripping or backing out under vibration.
- Built for High-Vibration Environments — Reversible plate compactors generate continuous cyclic vibration; a properly spec'd corrugated head fastener resists self-loosening over extended operating cycles in ways a standard screw cannot.
- Direct-Fit Across a Wide DPU Range — Confirmed fitment across DPU80, DPU90, and DPU110 series models, including Lec, Lem, rLec, rLem, KMAT, and US-market variants.
- Genuine Wacker Neuson OEM Part — Supplied through the Wacker Neuson OEM parts network, so you receive the same fastener installed at the factory — not a generic substitute.
- Keeps Critical Assemblies Secure — A failed or incorrect fastener on a compactor can allow panels, guards, or mechanical assemblies to shift during operation; replacing with the correct OEM screw restores the integrity of the joint.
A corrugated head screw uses a ridged or serrated underside on its head to grip the mating surface as it is tightened. This mechanical biting action creates a locking effect that resists vibration-induced loosening — a critical property in equipment like reversible plate compactors, where sustained oscillation is inherent to the machine's function. When this type of fastener wears, strips, or is replaced with an incorrect substitute, the joint it secures can work loose during operation, potentially allowing covers, structural panels, or component mounts to shift, which can affect both machine performance and operator safety.
Part Details
| Part Number | 5100005604 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Corrugated Head Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU110Lec970 | DPU110Lec970 | 5100027035 |
| DPU80Lec770 | DPU80Lec770 | 5100026787 |
| DPU80Lec670 | DPU80Lec670 | 5100027032 |
| DPU110Lec870 | DPU110Lec870 | 5100026869 |
| DPU90Lec770 | DPU90Lec770 | 5100027536 |
| DPU90Lec670 | DPU90Lec670 | 5100027534 |
| DPU80Lem770 | DPU80Lem770 | 5100018444 |
| DPU80rLec670 | DPU80rLec670 | 5100027033 |
| DPU90Lem770 | DPU90Lem770 | 5100024731 |
| DPU80rLec770 | DPU80rLec770 | 5100027034 |
| DPU110Lem970 | DPU110Lem970 | 5100024696 |
| DPU110Lec970 US | DPU110Lec970 US | 5100026784 |
| DPU90Lec770 US | DPU90Lec770 US | 5100028357 |
| DPU80Lem670 | DPU80Lem670 | 5100024695 |
| DPU110Lem870 | DPU110Lem870 | 5100018445 |
| DPU80rLem670 | DPU80rLem670 | 5100024697 |
| DPU110Lem970 US | DPU110Lem970 US | 5100024730 |
| DPU110rLec870 | DPU110rLec870 | 5100027077 |
| DPU90rLec770 US | DPU90rLec770 US | 5100028359 |
| DPU80rLem770 | DPU80rLem770 | 5100024698 |
| DPU90Lem770 US | DPU90Lem770 US | 5100024732 |
| DPU110rLec970 | DPU110rLec970 | 5100027036 |
| DPU110rLec970 US | DPU110rLec970 US | 5100026786 |
| DPU110rLem970 | DPU110rLem970 | 5100024699 |
| DPU110rLem870 | DPU110rLem870 | 5100026697 |
| DPU90rLem770 | DPU90rLem770 US | 5100028358 |
| DPU110rLem970 US | DPU110rLem970 US | 5100026785 |
| DPU110Lekc970 | DPU110Lekc970 | 5100034515 |
| Vibration Plate DPU 80-110(r) KMAT | DPU 80/110 KMAT | 5100016604 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
