The Wacker Neuson 5000213076 Cylinder is a genuine OEM component built for the BS-series gasoline vibratory rammer line, covering a wide range of models including the BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, and BS70-2 series rammers. As a direct Wacker Neuson OEM part, the 5000213076 is manufactured to the same tolerances and material standards as the original, ensuring a drop-in fit with no improvised adaptations. This cylinder serves one of the most mechanically demanding roles in the machine, making correct part specification critical to safe, effective operation.
Key Features
- Genuine OEM Bore Integrity — Manufactured to Wacker Neuson's original bore diameter and wall thickness specifications, maintaining the compression characteristics the engine was designed around.
- Direct Drop-In Installation — Matches the original mounting bolt pattern and port geometry of the BS-series rammer engine block, fitting exactly as the factory-installed unit did.
- Broad BS-Series Compatibility — Confirmed fitment across BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, and BS70-2 rammer variants, including US, CN, Sunbelt, and standard configurations.
- Sustained Compression Performance — A cylinder in sound condition maintains proper compression for reliable starts and full-stroke ramming power; a worn or cracked cylinder causes hard starting, power loss, and excessive fuel consumption.
- Engine Safety Compliance — Using the correct OEM cylinder ensures combustion pressures remain within designed limits, protecting the piston, rings, and crankcase from damage caused by improper clearances.
The cylinder is the core combustion chamber of the rammer's two-stroke gasoline engine. It houses the piston as it travels through its stroke, and the precision of its bore surface directly controls compression ratio and fuel-air combustion efficiency. When a cylinder becomes worn, scored, or cracked, the engine loses compression, leading to weak or absent ramming force, difficult starting, and increased exhaust emissions. Replacing a failed cylinder with a correct OEM unit restores the engine's designed power output and keeps the rammer delivering the consistent impact energy needed for effective trench and cohesive soil compaction.
Part Details
| Part Number | 5000213076 |
|---|---|
| Old Part Number | 0213076 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cylinder |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS30 | BS30 | 5100037146 |
| BS50-2 10in | BS50-2 10in | 5100058346 |
| BS50-2 11in US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 11in o. bsz | BS50-2 11in o. bsz | 5100068309 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 11in ha US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2 11in | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2plus 11in ha US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
