The Wacker Neuson Elbow is a genuine OEM component designed for the E3000, E2200, E1100, HSH700, HSH650, HSH350, S3000, E700M, and Pureheat series hydronic surface heaters and ground heaters. As a direct OEM replacement, this elbow is sourced and manufactured to Wacker Neuson's original specifications, ensuring a proper fit within the fluid or plumbing circuit it serves. This part covers an extensive range of configurations across these families, including ground heater, hydronic surface heater, lift bail, and generator-equipped variants. Verify your machine's model and serial number against the fitment list before ordering to confirm compatibility.
Key Features
- Genuine OEM Construction — Manufactured to Wacker Neuson's original material and dimensional specifications, ensuring the correct flow geometry and connection integrity expected in a pressurized hydronic circuit.
- Direct-Fit Replacement — Designed to seat and connect exactly as the original, matching the port orientation and thread or barb interface of the factory plumbing assembly.
- Broad Fitment Across Hydronic Heater Families — Compatible with E3000, E2200, E1100, HSH700, HSH650, HSH350, S3000, E700M, and Pureheat series units, spanning ground heater and hydronic surface heater configurations.
- Maintains Circuit Integrity — A correctly fitted elbow keeps the hydronic fluid routed under controlled pressure; a cracked or leaking elbow can result in fluid loss, pressure drop, and loss of heating output across the hose network.
- Verified OEM Part Number — Ordering by part number 5000168328 confirms you are receiving the exact component Wacker Neuson specifies for these heater models, eliminating guesswork on service calls.
An elbow fitting redirects the flow of heated fluid within the hydronic circuit of a ground heater or surface heater, allowing the plumbing to change direction between the boiler unit, distribution manifold, and hose network. In a hydronic heating system, maintaining sealed, leak-free connections at every junction is critical — even a minor drip at an elbow fitting can depressurize the circuit and reduce the system's ability to deliver consistent heat to concrete forms, frozen ground, or curing slabs. When an elbow cracks, corrodes, or strips at its connection points, it should be replaced promptly with the correct OEM part to restore full system pressure and heating efficiency.
Part Details
| Part Number | 5000168328 |
|---|---|
| Old Part Number | 0168328 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Elbow |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190, 5000620220 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5000620244, 5200001676 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| Hydronic Surface Heater w/ Gen erator, 3000 ft hose | S3000 | 5000620218, 5000620182 |
| HSH650 | HSH650 | 5000620991 |
| Hydronic Surface Heater, 700m hose | E700M | 5000620195 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
