The Wacker Neuson Hex Jam Nut M10 is a genuine OEM fastener used across a wide range of Wacker Neuson equipment, including DPU reversible vibratory plate compactors, PT3H centrifugal trash pumps, BFS floor saws, HSH hydronic surface heaters, and G125 mobile generators. As a genuine OEM part, the is manufactured to the exact thread pitch, hardness grade, and dimensional tolerances specified for each application it serves. This broad cross-model fitment makes it a practical stock item for dealers, service technicians, and fleet operators managing multiple Wacker Neuson machines.
Key Features
- Genuine OEM Thread Integrity — Manufactured to the exact M10 thread pitch and hardness grade specified by Wacker Neuson, ensuring proper torque retention without thread stripping or galling.
- Jam Nut Design Locks Fastener Position — The low-profile jam nut profile is engineered to lock against an adjacent nut or component, preventing loosening under vibration — critical on compaction and cutting equipment.
- Wide Cross-Model Compatibility — Confirmed fit across DPU 3050H, DPU 3060H, DPU 3750Hts, PT3H trash pumps, BFS 1345AS, BFS 1350ALS, BFS 2575KLS, HSH350, G125 generators, and additional Wacker Neuson models.
- Vibration-Resistant Retention — On compactors, saws, and pumps operating under continuous load and vibration, a correctly specified jam nut maintains critical component positioning and prevents hardware migration.
- Direct OEM Replacement — Part number 5000010806 matches the original hardware specification, dropping in without machining, re-tapping, or adapting existing threaded interfaces.
A hex jam nut is a thin, low-profile nut threaded onto a bolt or stud and tightened against a primary nut or fixed surface to prevent rotation and loosening over time. On equipment subject to sustained vibration — such as plate compactors, floor saws, and trash pumps — standard nuts can gradually back off under cyclic loading, causing component misalignment, structural loosening, or hardware loss. The jam nut counters this by creating a compressive locking force between itself and the mating nut or surface. When a jam nut fails, strips, or goes missing, the fastener assembly it secures becomes vulnerable to backing out during operation, which can lead to accelerated wear or component separation.
Part Details
| Part Number | 5000010806 |
|---|---|
| Old Part Number | 0010806 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Hex Jam Nut M10 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| Mobile Generator (custom) | G125 | 5000620067, 5000620068, 5000009261 |
| DPU 3050H | DPU 3050H | 5000610039 |
| DPU 3060H | DPU 3060H | 5000610040 |
| DPU 3070H | DPU 3070H | 5000610041 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042 |
| Single Drum Vibratory Roller | RS800H | 5000006583 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| Diesel Power Unit for Internal Vibrator | D4000 | 5000009091 |
| Floor Saw | BFS 2575KLS | 5000008781 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| Vibration Plate DPS 1850Y | DPS1850Y | 5000007780 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950Y | 5000007874 |
| Diesel Walk-behind Saw | DFS 2075HLS | 5000008782 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Wacker Neuson