Wacker Neuson 5000011047 Plug M10 X 1

The Wacker Neuson is a genuine OEM Plug M10 X 1 designed for a wide range of Wacker Neuson compaction and cutting equipment, including the RT560 and RT820 vibratory trench rollers, RD10 tandem roller, DPU 4045H, DPU 5045H, and DPU 6055 reversible vibratory plates, DPS2040 and DPS2050 single-direction vibratory plates, DPU 2430F, DPU 2440F, and DPU 2450F reversible vibratory plates, the BS60Y vibratory rammer, and the DFS 90 floor saw. As a genuine OEM component sourced directly through Wacker Neuson's authorized parts network, part number meets the exact material and thread specification of the original — so you can install with confidence. This plug is a direct-fit replacement that slots into the factory-threaded port without rework or adaptation.

Key Features

• Genuine OEM Thread Integrity — Manufactured to the exact M10 x 1 thread pitch and material spec of the original, ensuring a leak-free, full-engagement seal in the threaded port.
• Direct-Fit Installation — Matches the original factory thread profile on the RT560, RT820HT, DPU series, RD10, BS60Y, and DFS 90, so it threads in cleanly without chasing or recutting the port.
• Broad Cross-Model Compatibility — A single part number covers trench rollers, reversible and single-direction vibratory plates, a tandem roller, a rammer, and a floor saw — reducing the number of service SKUs you need to stock.
• Port Sealing Performance — A correctly seated plug keeps oil, hydraulic fluid, or coolant securely contained; a damaged or missing plug risks fluid loss, contamination ingress, and accelerated wear to internal components.
• Fluid System Safety — On hydraulic and engine-oil circuits, a properly torqued plug prevents uncontrolled fluid release that could create slip hazards or cause sudden machine shutdown on the worksite.

A threaded plug seals an access or drain port in a machine's fluid circuit — commonly found on engine oil sumps, hydraulic reservoirs, gear cases, or coolant passages. Its job is to keep the fluid system closed and pressurized (or unpressurized, depending on the circuit) while blocking contamination from entering when the port is not in use. When a plug develops cross-threading, corrosion, or a damaged seating face, it can weep fluid under load or allow dirt ingress, both of which accelerate internal component wear. Replacing a worn or compromised plug promptly with the correct OEM specification part is one of the simplest and most cost-effective steps in routine fluid-system maintenance.

Part Details

Compatibility & Fitment

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.