The Wacker Neuson Screw M8 X 35 Hex Head is a genuine OEM fastener used across a wide range of Wacker Neuson equipment families. This M8 x 35mm hex head screw is sourced directly from Wacker Neuson and meets the same dimensional and material standards as the hardware originally installed at the factory. Verified fitment spans BTS cut-off saws, RD tandem rollers, DS diesel rammers, CT and CRT concrete trowels, LTN and LTW light towers, VP vibratory plates, BS gasoline rammers, BFS floor saws, and additional models — making one of the most broadly applicable fasteners in the Wacker Neuson parts catalog.
Key Features
- Genuine OEM Material Grade — Manufactured to Wacker Neuson's specified tensile and hardness requirements for M8 fasteners, ensuring consistent clamping force without risk of thread stripping or shear failure under vibration loads.
- Standard M8 x 35mm Hex Head Profile — The hex head drive allows full torque application with a standard wrench or socket, supporting correct installation torque across all listed assemblies.
- Broad Cross-Family Fitment — Confirmed for BTS cut-off saws, RD12 and RD7 tandem rollers, DS70 and DS720 diesel rammers, CT and CRT trowels, LTN and LTW light towers, VP vibratory plates, BS rammers, BFS floor saws, and more.
- Vibration-Environment Performance — Used throughout equipment that generates sustained mechanical vibration; consistent thread form and shank length maintain joint integrity over extended service intervals.
- Direct OEM Replacement — Part number 5000011340 is the exact Wacker Neuson catalog reference, eliminating guesswork when ordering and confirming compatibility across all listed machine serial configurations.
A hex head cap screw serves as a structural fastener that clamps two or more components together by converting rotational torque into clamping load. In vibration-intensive equipment such as compactors, rammers, and cut-off saws, fasteners are subject to constant dynamic stress that can cause undertorqued or incorrect-grade hardware to loosen or fatigue over time. Using the correct OEM-specified screw — proper thread pitch, shank length, and material grade — ensures the joint holds its design clamping force and the assembled components remain aligned and secure through normal service life.
Part Details
| Part Number | 5000011340 |
|---|---|
| Old Part Number | 0011340 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw M8 X 35 Hex Head |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cut-off saw BTS 635 | BTS 635 | 5000610190, 5000610191 |
| Cut-off saw BTS630 | BTS 630 | 5000610186, 5000610187 |
| Cut-off Saw BTS 635S | BTS 635S | 5000610192, 5000610193, 5000610407 |
| RD12A-90 ROLLER,DBL DRUM,GRN | RD12A-90 | 5000620369, 5000620058, 5000620320 |
| RD12-90 ROLLER, DOUBLE DRUM, SOLID ROPS | RD12-90 | 5000620059, 5000620321 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5000009342, 5000009402, 5000009403 |
| CT48-11A Trowel | CT48-11A | 5000009450 |
| CT36-400E Trowel | CT36-400E | 5000009448, 5000620828 |
| RD 7ES | RD7H-ES EU | 5000620794 |
| RD 7S | RD7H-S EU | 5000620795 |
| RD7H-ES Tandem Roller | RD7H-ES | 5000009408 |
| RD7H-S ROLLER,DOUBLE DRUM | RD7H-S | 5000009487 |
| Walk-behind Vibratory Roller ( no engine) | RD7-RAW | 5000620079, 5000620596, 5000620478 |
| 1220mm/48in High Speed Ride-On Trowel | CRT48-31V-H | 5000009086 |
| LTN6C, CATERPILLAR | LTN6C | 5000620118, 5000620551, 5000620728, 5000620555, 5200004091, 5200022157 |
| LTN6C-P LIGHT TOWER,60 HZ | LTN6C-P | 5000620298 |
| 1220mm/48in Low Speed Ride-On Trowel | CRT48-25K-L | 5000009084 |
| 1220mm/48in High Speed Ride-On Trowel | CRT48-25K-H | 5000009085 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-23K-H | 5000009083 |
| LTN6L, KOHLER (LOMBARDINI) | LTN6L | 5000620117, 5000620121, 5000620727, 5000620550, 5000620552, 5000620119, 5000620120, 5000620553, 5200004090, 5200004768, 5200012438, 5200022990, 5200017094, 5200017095, 5200022155, 5100027056 |
| LTN6L-P LIGHT TOWER,60 HZ | LTN6L-P | 5000620297 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11V | 5000007694 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11A | 5000007693 |
| Double Drum Vibratory Roller | RD7H | 5000008042 |
| LTW20Z-1, LIGHT TOWER 60Hz, ISUZU, CUSTOM, T4i | LTW20Z1 | 5000620842, 5000620375, 5200004205, 5200004096, 5100051572, 5100051571, 5200014324, 5200014326, 5200018239, 5200023191, 5200024872, 5200014328 |
| LTW6K Light Tower, Standard T4 | LTW6K | 5000620372, 5000620840, 5200004094, 5200024870 |
| LTW8K Light Tower, Standard T4 | LTW8K | 5000620374, 5000620841, 5200004204, 5200004095, 5200023190, 5200024871 |
| CRT48-35L-PS | CRT48-35L-PS | 5000620704 |
| Diesel Vibratory Rammer, 330mm /13in Shoe | DS720 | 5000008203, 5000008200, 5000009059, 5000009060, 5000009309 |
| LTW20Z-3, LIGHT TOWER 60HZ, ISUZU TIER 4i | LTW20Z3 | 5000620376, 5000620843, 5200003583, 5200004097, 5200014325, 5200014327, 5200023192, 5200023604, 5200014329 |
| CRT48-35L-PS | CRT48-35L-PS EU | 5000620900 |
| Ride-on Trowel | CRT48-31V-E | 5000009481 |
| LTN6K Light Tower | LTN6K | 5000620734, 5200022156, 5200022147 |
| LTN8K, KUBOTA | LTN8K | 5000620893, 5000620939 |
| RTLx-SC3 Trench Roller w/Compatec | RTLx-SC3 | 5100018515, 5100018516, 5100052269 |
| RTKx-SC3 Trench Roller w/Compatec | RTKx-SC3 | 5100018517, 5100018518, 5100052333 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-24A-H | 5000009232 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| VP1135A VIBROPLATE | VP1135A | 5000009057 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135R | 5000009071 |
| Vibratory Rammer with 254mm/10 in Shoe | BS52Y | 5000007508, 5000008053, 5000008054, 5000009409, 5000007148, 5000007559, 5000007560, 5000007609 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032 |
| Hydrostatic Vibratory Roller | RD27-100 | 5200005878, 5200014868, 5200023554, 5200023556, 5200005876, 5200021387 |
| Hydrostatic Vibratory Roller | RD27-120 | 5200005879, 5200014869, 5200014922, 5200014923, 5200023555, 5200023557, 5200024441, 5200005877, 5200021389 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| 915mm/36in Ride-On High Speed Trowel | CRT36-25K-H | 5000620027 |
| CRT60-66K | CRT60-66K | 5000620921, 5000620922 |
| VP1340W VIBROPLATE | VP1340W | 5000008706 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029 |
| VP1340A VIBROPLATE | VP1340A | 5000009031 |
| VP2050A VIBROPLATE | VP2050A | 5000009087 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088 |
| LTN6L 50 Hz Non CE. Custom | LTC6L | 5000620559 |
| MP15 | MP15 | 5000630131, 5000630227 |
| VP1030R-VIBROPLATE | VP1030R | 5000008702, 5000009504 |
| VP1550W VIBROPLATE | VP1550W | 5000008708, 5000630013 |
| LTN6K LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-LT | 5000620938, 5200004092, 5200004769 |
| Electric Rammer 230V | ES52Y | 5000007688, 5000008290 |
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5000630047 |
| VP1340 Single Direction Vibratory Plate | VP1340 | 5000008705 |
| 1220mm/48in Ride-on Trowel, El ectronic Steering | CRT48-31V-ES | 5000009216 |
| Ride-on Trowel | CRT48-31V-ES-E | 5000009482 |
| VP1550 VIBROPLATE | VP1550 | 5000008707 |
| VP1030Aw | VP1030AW | 5000009514, 5000630423 |
| Single Direction Plates | AP1550R | 5000009538 |
| LTN8K LIGHT TOWER, COLD WEATHER, Tier 4F | LTN8K-LT | 5200004093 |
| CRT48-57K Trowel, Power Steer | CRT48-57k-PS | 5200018779 |
| Value Vibratory Plate, 15kN, 5 00mm/19.5in | VP2050(RAW) | 5000008704 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| Value Vibratory Plate, 10 kN, 356mm/14in | VP1035R | 5000008208 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | AP1550AW | 5000009540 |
| CRT48-37V Trowel, Power Steer | CRT48-37V-PS | 5100024291 |
| Gasoline Power Unit for Intern al Vibrator | A3000 | 5000006237 |
| Power Cutter BTS 1035 L3 | BTS 1035 L3 | 5000008912, 5000008990, 5000610076, 5000610182 |
| Cut-Off Saws | BTS 1030 L3 | 5000008989, 5000610075 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050Y | 5000009089, 5000009515, 5000009090 |
| Single Direction Plate | AP1135R | 5000009518 |
| Single Direction Plate | MP15(RAW) | 5000630245 |
| CRT48-57K-PS | CRT48-57k-PS EU | 5200018820 |
| Cut-Off Saws | BTS 930 L3 | 5000008987, 5000610073 |
| Cut-Off Saws | BTS 935 L3 | 5000008988, 5000610074 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| VP2050W VIBROPLATE | VP2050W | 5000009537 |
| Single Direction Plates | AP1550A | 5000009539 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| CRT48-35V, Power Steer | CRT48-35V-PS | 5200016909 |
| Gasoline Power Unit for Intern al Vibrator | B 3000 | 5000005829 |
| Gasoline Power Unit for Intern al Vibrator | B 5000 | 5000007522, 5000006307 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| 500mm/50in, 20kN Value Vibrato ry Plate | VP2050 | 5000009530 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| LTN6L 50 Hz CE- RACKED | LTN6LE | 5200019142, 5200019143, 5200019141 |
| Power Unit for Internal Vibrat ors | X 3000 | 5000006251 |
| Electric Rammer | ES45Y | 5000007164 |
| Cut-off Saw with 20mm Arbor | BTS 930 | 5000008340 |
| Cut-off Saw with 1in Arbor | BTS 935 | 5000008341 |
| Single Direction Plates | VP1340W-L | 5000630001 |
| Single Direction Plates | VP1340W-LL | 5000630002 |
| Single Direction Plates | VP1340W-LF | 5000630003 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| VP1340W VIBROPLATE, W/WHEEL KIT | VP1340W w/WH | 5000630121 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| VP1550AW-CN | VP1550AW-CN | 5100055200 |
| Cut-off Saw with 1in Arbor | BTS 1035 | 5000007975 |
| Cut-off Saw with 20mm Arbor | BTS 1030 | 5000008339 |
| P35A | P35A | 5000620956, 5000620958, 5100057755, 5100057756 |
| P35A | P35A EU | 5000620957 |
| Single Direction Plates | MP15-CE | 5000630338 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| Petrol Floor Saw BFS 1350L | BFS 1350L | 5000008936 |
| Diesel Power Unit for Internal Vibrator | D4000 | 5000009091 |
| BTS 1140L3 SAW | BTS 1140 L3 | 5000610063, 5000610078 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| Floor Saw BTS 630S | BTS 630S | 5000610406 |
| BTS635s | BTS635s | 5100005408 |
| E2200 GROUND HEATER, 3kW GENERATOR | E2200 | 5100017448, 5100017449 |
| High Cycle Portable Generator | GH3500E | 5000005785 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| Single Direction Plates | MP20 | 5000630379 |
| BTS635S Cut-off Saw | BTS 635s | 5100005409, 5100005411 |
| Vibratory Rammer with 250mm/10 in Shoe | BS45Y | 5000007137 |
| Vibratory Rammer with 152mm/6i n Shoe | BS45YA | 5000007558 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Gasoline Floor Saw, Ø 450 cutm atic | BFS 1345K | 5000008711 |
| Single Direction Plates | MP12 | 5000630380 |
| GPS9700 Generator | GPS9700 | 5100036768 |
| Light Tower | LTV6K | 5100039424 |
| Tower/Winch Assembly | Tower/Winch Assembly | 5100039515 |
| Soil and Asphalt Compaction | CB14B-900 | 5200005252 |
| Light Tower | LTV8K | 5100039425 |
| Light Tower | LTV6L | 5100039607 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
