The Wacker Neuson is a genuine OEM Screw M8 x 18 Socket Head designed for a broad range of Wacker Neuson equipment, including PT6-series trash pumps, RT560 and RT820 vibratory trench rollers, RD10 and RD15 tandem rollers, DPU 6055 reversible vibratory plate compactors, and BS30 and BS70 rammers. Sourced directly from Wacker Neuson, this fastener meets the exact material grade, thread specification, and head geometry specified for your machine. It is a direct-fit replacement that reinstalls without modification, restoring the original fastened joint to its designed clamping load. Cross-model compatibility makes part number a practical addition to any service inventory covering mixed Wacker Neuson fleets.
Key Features
- Genuine OEM Material Grade — Manufactured to the exact tensile strength and thread class specified by Wacker Neuson, ensuring the fastener holds its torque rating under vibration-intensive operating conditions.
- M8 x 18 Socket Head Profile — The recessed hex socket drive allows installation in tight clearances where a standard hex bolt cannot be accessed, fitting precisely into the same bolt pattern as the original.
- Wide Cross-Model Fitment — Confirmed for PT6LT, PT6LS, PT6Y, PTK6, RT560, RT820, RT820HT, RD10, RD15, DPU 6055, BS30, BS70, AS30e, and additional variants — one part number covers a broad range of Wacker Neuson machines.
- Vibration-Resistant Clamping — On compaction and demolition equipment subjected to constant dynamic loads, a correctly spec'd fastener maintains joint integrity and prevents loosening that can lead to component misalignment or damage.
- Torque-Critical Fastener Safety — In pump housings, roller frames, and compactor drive assemblies, an under-spec fastener can back out under load, creating a safety hazard; using the correct OEM fastener maintains the designed clamping force.
A socket head cap screw is a high-strength threaded fastener with a cylindrical head and an internal hex (Allen) drive socket. On Wacker Neuson equipment, fasteners like the 5000011545 are used to secure housings, guards, brackets, and structural assemblies where controlled torque and compactness are required. When a fastener of this type strips, corrodes, or breaks, the joint it holds can shift or separate, potentially damaging surrounding components or creating an unsafe operating condition. Replacing it with the correct OEM-specified fastener restores the clamping load the engineer designed into that joint.
Part Details
| Part Number | 5000011545 |
|---|---|
| Old Part Number | 0011545 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw M8 x 18 Socket Head |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT6LT Pump w/Trailer | PT6LT | 5000007175, 5200014740 |
| 150mm/6in Centrifugal Trash Pu mp Skid Mounted | PT6LS | 5000007174, 5200014741 |
| Vibratory Trench Roller | RT560 | 5000009001, 5000009000, 5000007643, 5000007642 |
| Vibratory Trench Roller | RT820 | 5000009003, 5000009002, 5000007644, 5000007652 |
| Vibratory Trench Roller | RT820HT | 5000007645, 5000008047 |
| Hydrostatic Double Drum Vibrat ory Roller | RD15 | 5000008057, 5000009316 |
| BS30 | BS30 | 5000005216, 5100037146 |
| Hydrostatic Double Drum Vibrat ory Roller | RD10 | 5000008056 |
| Reversible Vibratory Plate, 60 kN, 55cm/22in | DPU 6055 | 5000008766, 5000008767, 5000008768, 5000610048, 5000610049, 5000610050 |
| AS30e | AS30e | 5100026851 |
| PT6Y | PT6Y-SA | 5100070835 |
| PT6YT | PT6YT | 5100070966 |
| PUMP PT6Y-AU | PT6Y-AU | 5100076956 |
| PT6YT | PT6YT-IN | 5100077923 |
| PT 6LS | PT6LS(I) | 5200017427, 5200012427 |
| Trash Pump | PT6LT(I) | 5100014076 |
| PT6Y | PT6Y | 5100064168, 5100069617 |
| Trash Pump | PTK6 | 5200007830 |
| DPU6055-VIBROPLATE | DPU 6055He | 5000610053 |
| PT6Y | PT6Y EPA T4 | 5100073464 |
| Rammer | BS70-4Rc LA | 5100082769 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
