The Wacker Neuson is a genuine OEM Screw M5 x 30 Socket Head designed for the RTLx-SC3, RTKx-SC3, and RTL82-SC3 series remote-controlled trench rollers, as well as select DPU reversible vibratory plate compactors and APU battery-powered vibratory plate models. As a direct OEM replacement sourced through authorized Wacker Neuson channels, part meets the exact material grade, thread specification, and head geometry required for proper assembly. Fitment extends across a wide range of RTL and RTK trench roller configurations, including Compatec-equipped variants, making this a versatile hardware item for fleet maintenance operations. Confirm your machine's model number against the fitment list before ordering to ensure a match.
Key Features
- Genuine OEM Material Grade — Manufactured to the exact M5 x 30 thread pitch, shank length, and socket head profile specified by Wacker Neuson, ensuring consistent torque loading and secure fastening in the assembly.
- Socket Head Drive Interface — The internal hex socket head allows use of a standard hex key or Allen wrench for installation in recessed or tight-clearance mounting locations common on trench roller frames and compactor housings.
- Wide Cross-Model Fitment — Covers RTLx-SC3, RTKx-SC3, RTL82-SC3, and RTK82-SC3 trench rollers, plus select DPU reversible vibratory plate compactors, APU battery-powered vibratory plates, and additional Wacker Neuson equipment variants.
- Correct Clamping Force — Using the correct OEM screw maintains the designed clamping load at the joint, preventing component loosening under the continuous vibration cycles generated during compaction operations.
- Direct Assembly Replacement — Replaces a lost, stripped, or damaged fastener with an exact-specification item, restoring the assembly to its original structural integrity without substitution guesswork.
A socket head cap screw such as the 5000011558 is a threaded fastener used to clamp two or more components together within a machine assembly. The M5 x 30 designation indicates a 5 mm thread diameter and 30 mm shank length, while the socket head profile provides a secure hex-key drive point suited to confined installation spaces. On equipment subjected to sustained vibration — such as trench rollers and vibratory plate compactors — fasteners carry continuous dynamic loads, and a stripped, corroded, or incorrectly specified screw can allow joint movement, accelerate wear on mating components, or cause assembly failure during operation.
Part Details
| Part Number | 5000011558 |
|---|---|
| Old Part Number | 0011558 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw M5 x 30 Socket Head |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5100052330 |
| Reversible Vibratory Plate, 10 0kN, 70cm/28in | DPU 100-70 | 5000007942, 5000610320, 5000008991, 5000008900 |
| Reversible Vibratory Plate, 24 kN, 30cm/12in | DPU 2430F | 5000006200 |
| Single Direction Vibratory Pla te, 20kN, 40cm/16in | DPS2040 | 5000007853 |
| Single Direction Vibratory Pla te, 20kN, 50cm/20in | DPS2050 | 5000007854 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2450F | 5000007876 |
| Vibration Plate DPU 2440F WGB | DPU 2440F | 5000007877, 5000007878, 5000007879, 5000007886 |
| APU3050e | APU3050e | 5100063132 |
| Vibration Plate APU3050e (LOXAM) | APU3050e (LOXAM) | 5100072122 |
| Powered Floor Saw DFS 90 | DFS 90 | 5000006653 |
| Reversible Vibratory Plate, 70 kN, 60cm/24in | DPU 7060 | 5000007938 |
| Reversible Vibratory Plate, 70 kN, Remote Controll | DPU 7060RC | 5000007939 |
| FUH20/1/042 | FUH20/1/042 | 5100001554 |
| APU2840e | APU2840e | 5100076967 |
| APU2850e | APU2850e | 5100076968 |
| APU2860e | APU2860e | 5100076969 |
| APU3340e | APU3340e | 5100076970 |
| APU3360e | APU3360e | 5100076971 |
| APU3350e | APU3350e | 5100077806, 5100077807 |
| Vibroplate APU KMAT | APU KMAT | 5100060379 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
