The Wacker Neuson 5100027617 Stud is a genuine OEM component designed for the BS-series gasoline vibratory rammer lineup, covering the BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, BS70-2, and BS70-2plus models across a wide range of stroke and configuration variants. As a genuine Wacker Neuson part, the 5100027617 is sourced directly from the original manufacturer, ensuring it meets the exact material and dimensional standards of the original. This stud is confirmed to fit an extensive range of BS-series rammer configurations, including 6-inch, 10-inch, and 11-inch stroke variants as well as US, CN, Sunbelt, and heavy-application designations. When you need a verified, direct-fit replacement to restore your rammer to full working order, part number 5100027617 is the correct specification for these machines.
Key Features
- Genuine OEM Material Integrity — Manufactured to the original thread form, grade, and dimensional spec, ensuring the stud seats and torques correctly without risk of stripping or misalignment.
- Direct-Fit Installation — Threaded to match the original mounting points on BS-series rammer assemblies, dropping straight in without reworking the mating hardware.
- Broad BS-Series Compatibility — Confirmed fitment across BS30, BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, BS70-2, and BS70-2plus rammers in multiple stroke and regional configurations.
- Structural Fastening You Can Count On — A correctly installed stud maintains the clamping load and alignment needed to keep critical rammer components secure through high-impact, high-vibration operation cycles.
- Verified Wacker Neuson Part Number — Sourced as a genuine OEM part under part number 5100027617, eliminating guesswork on cross-referencing for the listed BS-series models.
A stud is a headless threaded fastener that anchors two or more components together at a fixed mounting point. In a vibratory rammer, studs are subjected to continuous shock loading and vibration, making correct thread engagement and material grade critical to maintaining structural integrity. A worn, stretched, or damaged stud can cause joint loosening, component misalignment, or fastener failure during operation — conditions that compromise both machine performance and operator safety.
Part Details
| Part Number | 5100027617 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Stud |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS30 | BS30 | 5100037146 |
| BS50-2 10in | BS50-2 10in | 5100058346 |
| BS50-2 11in US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 11in o. bsz | BS50-2 11in o. bsz | 5100068309 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 11in ha US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2 11in | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2plus 11in ha US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
