The Wacker Neuson 110/220 Volt Switch is a genuine OEM component designed for the IRSEN series internal concrete vibrators, including IRSEN 38, IRSEN 45, IRSEN 57, and IRSEN 65 needle vibrator models. As a direct OEM replacement, this switch is sourced and specified to meet the original design requirements of the IRSEN vibrator family. It fits an extensive range of IRSEN configurations — covering standard, GV, Laser, FU, and WGB variants across both 115 V and 230/250 V platforms. Confirm your model number against the fitment list before ordering to ensure this is the correct switch for your unit.
Key Features
- Dual-Voltage Switching Capability — Selects between 110 V and 220 V input configurations, allowing the vibrator to operate correctly on either power supply without internal rewiring.
- Genuine OEM Part — Manufactured to Wacker Neuson's original electrical specifications, ensuring correct contact rating, switching logic, and connector compatibility for IRSEN series vibrators.
- Direct Drop-In Replacement — Engineered to install in the same position as the original switch, using the existing housing and wiring connections with no adapters needed.
- Broad IRSEN Series Coverage — Fits IRSEN 38, IRSEN 45, IRSEN 57, and IRSEN 65 models across standard, GV, Laser, FU, and WGB variants in both 115 V and 230/250 V versions.
- Electrical Safety Integrity — A correctly rated voltage selector switch is critical on dual-voltage equipment; an incorrect or failed switch can result in motor burnout or unsafe operating conditions on mismatched power supplies.
- Restores Full Voltage Flexibility — A worn or failed switch locks the vibrator to one voltage setting; replacing it restores the unit's ability to run on either 110 V or 220 V jobsite power as required.
The 110/220 Volt Switch on an IRSEN internal concrete vibrator is the operator-accessible selector that configures the motor to run on either a 110 V or 220 V power source. By physically reconfiguring the internal winding connections through a single switch position, it allows one vibrator unit to be deployed across different jobsite power supplies without opening the motor housing. When this switch fails, becomes intermittent, or is set incorrectly for the available supply voltage, the vibrator motor can run inefficiently, overheat, or fail to start — disrupting concrete consolidation work and risking damage to the drive unit.
Part Details
| Part Number | 5000013989 |
|---|---|
| Old Part Number | 0013989 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | 110/220 Volt Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| IRSEN58/042 | IRSEN58/042 | 5000007901 |
| 57 mm Internal Vibrator, short | IRSEN 57k | 5000008596 |
| Internal Vib. IRSEN 57/115 | IRSEN 57/115 | 5000008599 |
| Internal Vib. IRSEN 57k/115 | IRSEN 57k/115 | 5000008600 |
| IRSEN58/042GV | IRSEN58/042GV | 5000008642 |
| Internal Vib. IRSEN 57k GV | IRSEN 57k GV | 5000008643 |
| Int. Vib. IRSEN 57/115 Laser | IRSEN 57/115 Laser | 5000008646 |
| Int. Vib. IRSEN 57k/115 Laser | IRSEN 57k/115 Laser | 5000008647 |
| Internal Vib. IRSEN 57/250 | IRSEN 57/250 | 5000008651 |
| Internal Vib. IRSEN 57k/250 | IRSEN 57k/250 | 5000008652 |
| Internal Vib. IRSEN 57/250 GV | IRSEN 57/250 GV | 5000008656 |
| Internal Vib. IRSEN 57k/250 GV | IRSEN 57k/250 GV | 5000008657 |
| Int.Vib. IRSEN-FU 57/230 | IRSEN-FU 57/230 | 5000008725 |
| Int.Vib. IRSEN-FU 57/230 Laser | IRSEN-FU 57/230 Laser | 5000008728 |
| IRSEN-FU 115V 60HZ 57 | IRSEN-FU 57/115 | 5000008923 |
| Internal Vib. IRSEN 45/115 | IRSEN 45/115 | 5000008601 |
| Internal Vib. IRSEN 38/115 | IRSEN 38/115 | 5000008602 |
| IRSEN45/115Laser | IRSEN45/115Laser | 5000008648 |
| Int. Vib. IRSEN 38/115 Laser | IRSEN 38/115 Laser | 5000008649 |
| Internal Vib. IRSEN 45/250 | IRSEN 45/250 | 5000008653 |
| Internal Vib. IRSEN 38/250 | IRSEN 38/250 | 5000008654 |
| Internal Vib. IRSEN 45/250 GV | IRSEN 45/250 GV | 5000008658 |
| Internal Vib. IRSEN 38/250 GV | IRSEN 38/250 GV | 5000008659 |
| Int. Vib. IRSEN-FU 45/230 | IRSEN-FU 45/230 | 5000008726 |
| Int.Vib. IRSEN-FU 38/230 | IRSEN-FU 38/230 | 5000008727 |
| Int.Vib. IRSEN-FU 45/230 Laser | IRSEN-FU 45/230 Laser | 5000008729 |
| Int.Vib. IRSEN-FU 38/230 Laser | IRSEN-FU 38/230 Laser | 5000008730 |
| Int. Vib. IRSEN-FU 38/115 WGB | IRSEN-FU 38/115 WGB | 5000008921 |
| Int. Vib. IRSEN-FU 45/115 WGB | IRSEN-FU 45/115 WGB | 5000008922 |
| Internal Vibrator IRSE 03y | IRSE 0,3y | 5000006887 |
| Internal vib. IRSEN 65k GV | IRSEN 65k GV | 5000008641 |
| Internal vib. IRSEN 65k/250 | IRSEN 65k/250 | 5000008650 |
| Internal vib. IRSEN 65k/250 GV | IRSEN 65k/250 GV | 5000008655 |
| Internal vib. IRSEN 65k | IRSEN 65k | 5000008678 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
