The Wacker Neuson is a genuine OEM Shim designed for a broad range of Wacker Neuson reversible vibratory plate compactors, single-direction vibratory plates, and the RD10 tandem roller. As a direct OEM replacement, part is sourced through authorized Wacker Neuson supply channels, ensuring the correct material grade, thickness tolerance, and fitment are maintained exactly as specified for the original equipment. Confirmed fitment spans the DPU 2430F, DPU 2440F, DPU 2440H, DPU 2450F, DPU 4045H, DPU 5045H, and DPU 6055 reversible plate compactor series, as well as DPS2040 and DPS2050 single-direction plates, the DFS 90 powered floor saw, and the RD10 hydrostatic tandem roller. Verifying this part number against your machine's serial number before ordering is always recommended to confirm the correct application.
Key Features
- OEM-Specified Thickness Tolerance — Manufactured to the exact dimensional spec required for proper stack height and clearance within the compactor or roller assembly, preventing misalignment or premature wear of adjacent components.
- Drop-In Replacement — Matches the original shim's profile and bore dimensions, seating correctly without rework to mating surfaces or fastener hardware.
- Wide Fitment Coverage — Compatible with the DPU 4045H, DPU 5045H, DPU 6055, DPU 2440F, DPU 2430F, DPS2040, DPS2050, DFS 90, and RD10 — covering multiple Wacker Neuson compaction and cutting equipment families.
- Preserves Drive Train Geometry — A correctly fitted shim maintains the designed spacing between components, protecting bearings, gears, and shafts from unintended load concentration that a worn or incorrect shim would introduce.
- Genuine OEM Part — Supplied as an original Wacker Neuson component, ensuring material composition and dimensional accuracy meet the same standards as the shim installed at the factory.
A shim is a precision-thickness spacer used to set and maintain the correct clearance or alignment between two mating components — such as gears, shafts, bearing housings, or eccentric assemblies. In vibratory compaction equipment and rollers, maintaining the specified gap is critical: too little clearance causes components to bind and generate excess heat, while too much allows unwanted movement that accelerates wear on surrounding parts. When a shim wears thin, becomes deformed, or is lost during service, replacing it with a part of exactly the correct thickness — such as the Wacker Neuson 5000014481 — restores the designed geometry and protects the integrity of the entire assembly it supports.
Part Details
| Part Number | 5000014481 |
|---|---|
| Old Part Number | 0014481 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shim |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Reversible Vibratory Plate, 50 kN, 45cm/18in | DPU 5045H | 5000007862, 5000007936, 5000007965, 5000610045, 5000610046, 5000610047, 5000610052 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | DPU 4045H | 5000007888, 5000007935, 5000610043, 5000610044, 5000610051, 5000610064 |
| Hydrostatic Double Drum Vibrat ory Roller | RD10 | 5000008056 |
| Reversible Vibratory Plate, 60 kN, 55cm/22in | DPU 6055 | 5000008766, 5000008767, 5000008768, 5000610048, 5000610049, 5000610050 |
| Reversible Vibratory Plate, 24 kN, 30cm/12in | DPU 2430F | 5000006200 |
| Single Direction Vibratory Pla te, 20kN, 40cm/16in | DPS2040 | 5000007853 |
| Single Direction Vibratory Pla te, 20kN, 50cm/20in | DPS2050 | 5000007854 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2450F | 5000007876 |
| Vibration Plate DPU 2440F WGB | DPU 2440F | 5000007877, 5000007878, 5000007879, 5000007886 |
| Powered Floor Saw DFS 90 | DFS 90 | 5000006653 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| DPU6055-VIBROPLATE | DPU 6055He | 5000610053 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
