The Wacker Neuson Washer is a genuine OEM component designed for the EH series electric demolition breakers, including the EH 23, EH 24, EH 25, EH 27, EH 50, EH 65, EH 70, and EH 75 models across a wide range of voltage configurations. Sourced directly from Wacker Neuson, this washer matches the exact material grade and dimensional specification used in original production. It serves as a direct service replacement for machines showing wear, damage, or leakage at the washer position, covering corded electric breaker variants operating on 42V, 115V, 120V, 127V, 230V, and 240V supplies. With confirmed fitment across more than 40 EH series machine configurations, part number is the correct service replacement for a broad range of Wacker Neuson electric breaker platforms.
Key Features
- Genuine OEM Material Spec — Manufactured to the exact thickness, hardness, and bore tolerance specified for EH series electric breaker assemblies, ensuring correct load distribution and sealing performance.
- Drop-In Service Replacement — Matches the original mounting position and contact face geometry, allowing straightforward installation without modification to surrounding hardware.
- Broad EH Series Fitment — Compatible with EH 23, EH 24, EH 25, EH 27, EH 50, EH 65, EH 70, and EH 75 electric breaker models across multiple voltage variants and shank configurations.
- Maintains Fastener Clamp Load — A correctly spec'd washer distributes clamping force evenly across the joint face; an undersized or worn washer can cause fastener loosening under the high vibration loads typical of demolition breaker operation.
- Electrical Safety Relevance — In electric-powered breakers, washers seated near electrical housings or grounding paths must meet the correct dimensional spec to preserve insulation integrity and safe current paths.
A washer in a demolition breaker serves to distribute the clamping load of a fastener across a wider surface area, protecting the mating components from damage and maintaining consistent joint tension during high-vibration operation. In an electric breaker like the EH series, where internal components are subject to continuous percussive shock, even a small washer plays a critical role in keeping fastened assemblies tight and properly aligned. When a washer wears thin, deforms, or corrodes, the fastener it supports can work loose, leading to internal misalignment, accelerated wear on adjacent components, or potential safety concerns in electrically live housings.
Part Details
| Part Number | 5000015302 |
|---|---|
| Old Part Number | 0015302 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Washer |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Electric Breaker w/28x152 shan k, 110V | EH 27/115 | 5000008396 |
| E.Breaker EH 23/230 Low Vib | EH 23/230 Low Vib | 5000008914, 5000008941, 5000008942, 5000008943, 5000008944, 5000610297 |
| E.Breaker EH 23/115 Low Vib | EH 23/115 Low Vib | 5000008916 |
| Breaker | EH 27/120 Low Vib | 5000610195 |
| Breaker | EH 27/127 Low Vib | 5000610196 |
| Electric Breaker | EH 23/100 Low Vib | 5000610238 |
| EH75/240V Electric Breaker | EH 75/240V | 5000610294 |
| EH25/240 BREAKER | EH 25/230V | 5000610330, 5000610395, 5000610396, 5000610397, 5000610404 |
| EH65 BREAKER | EH 65/120V | 5000610421 |
| Electric Breaker EH 25/115V | EH 25/115V | 5100001903 |
| Electric Breaker w/28x152 shan k, 115V | EH 23/110/15 | 5000007767 |
| Electric Breaker w/Ø27x80 shan k, 230V | EH 23/230 | 5000007770, 5000007771, 5000007776 |
| Electric Breaker w/25x108 shan k, 230V | EH 23/230 EE25x108 | 5000007772 |
| El. Hammer EH 23/110/22 | EH 23/110/22 | 5000007774, 5000007815 |
| Electric Breaker w/27x80 shank , 42V | EH 24/042/200 | 5000007790, 5000610244 |
| E.Breaker EH 24/115/200 | EH 24/115/200 | 5000007791 |
| El. Hammer EH 24/250/200 | EH 24/250/200 | 5000007792 |
| Breaker EH 27/127 | EH 27/127 | 5000008957 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
| EH 50, hex 25x108 | EH 50/230 25x108 | 5100001908 |
| EH 50, 27x80 | EH 50/230 27x80 | 5100001909 |
| EH 75, 27x80 | EH 75/230 27x80 | 5100004152 |
| EH 75, hex 25x108 | EH 75/230 25x108 | 5100004153 |
| EH 75, hex 28x160 | EH 75/230 28x160 | 5100004154 |
| EH 75, hex 28x152 | EH 75/230 28x152 | 5100004155 |
| EH 75, hex 32x160 | EH 75/230 32x160 | 5100004156 |
| EH75/240 Electric Breaker | EH 75/240 28x152 US | 5100004157 |
| EH70 32x160 | EH 70/115 32x160 UK | 5100004158 |
| EH70/120 Electric Breaker | EH 70/120 28x152 US | 5100004159 |
| EH 50, hex 28x152 | EH 50/230 28x152 | 5100004472 |
| EH 50, hex 28x160 | EH 50/230 28x160 | 5100004473 |
| Electric Hammer | EH 50/230 28x160 BR | 5100009761 |
| Electric Hammer | EH 75/230 28x160 BR | 5100009762 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
