The Wacker Neuson O-Ring is a genuine OEM seal designed for a wide range of Wacker Neuson reversible vibratory plate compactors and internal concrete vibrators. This small but critical component is a direct replacement for BPU and DPU reversible vibratory plates — including the BPU 2440A, BPU 2450A, BPU 2950A, DPU 2430F, DPU 2440F, DPU 2440H, DPU 2450F, DPU 2450H, DPU 2870, DPU 2950, DPU 2960, DPU 2970, and MPU 29 series — as well as IREN 45, IREN 57, and IREN 65 internal vibrators. As a genuine Wacker Neuson OEM part, the is manufactured to the exact material grade and dimensional tolerances specified for these machines, ensuring a proper seal every time.
Key Features
- OEM-Grade Seal Material — Manufactured to Wacker Neuson's exact compound and durometer specification, delivering the compression resistance and chemical compatibility required for this application.
- Drop-In Replacement — Seats directly into the original groove without trimming or modification, maintaining the correct cross-section and sealing surface contact.
- Broad Fitment Coverage — Compatible with BPU, DPU, and MPU reversible vibratory plate compactors, plus IREN series internal concrete vibrators — one part number across multiple machine families.
- Prevents Fluid and Air Ingress — A correctly installed O-Ring keeps hydraulic or lubricating fluid contained and moisture out, protecting internal components from contamination and accelerated wear.
- Fluid System Integrity — A failed or degraded O-Ring can cause internal leaks that lead to loss of compaction force or vibrator output; replacing it promptly restores full machine performance.
An O-Ring is a simple loop of elastomeric material that creates a pressure-tight seal between two mating components — such as a housing bore and a shaft, or two fluid passages. In vibratory plate compactors and internal concrete vibrators, O-Rings are used throughout the hydraulic and lubrication circuits to prevent fluid from escaping and contaminants from entering. When an O-Ring hardens, cracks, or is pinched during assembly, the seal fails, resulting in fluid weeping, pressure loss, or contamination of critical internal surfaces. Replacing a worn O-Ring with the correct OEM part restores the sealing integrity the system depends on to operate at rated performance.
Part Details
| Part Number | 5000024243 |
|---|---|
| Old Part Number | 0024243 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Reversible Plates | MPU 29 | 5000630141, 5000630228 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Internal Vibrator IREN 57 | IREN 57 | 5000008346 |
| Internal Vibrator IREN 65 | IREN 65 | 5000008443 |
| Reversible Plates | MPU 29A | 5000630244 |
| Reversible Vibratory Plate, 24 kN, 30cm/12in | DPU 2430F | 5000006200 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2450F | 5000007876 |
| Vibration Plate DPU 2440F WGB | DPU 2440F | 5000007877, 5000007878, 5000007879, 5000007886 |
| Internal Vibrator IREN 45 | IREN 45 | 5000008474 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Reversible Vibratory Plate, 28 kN, 70cm/28in | DPU 2870 | 5000007289 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950Y | 5000007874 |
| Reversible Vibratory Plate, 29 kN, 70cm/28in | DPU 2970 | 5000007880 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950 | 5000007881, 5000007884 |
| Vibration Plate DPU 2960 | DPU 2960 | 5000007883 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
