Wacker Neuson 5000029436 Engine Governor Sleeve
Wacker Neuson

Wacker Neuson 5000029436 Engine Governor Sleeve

$10.56
(No reviews yet) Write a Review
SKU:
5000029436-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Engine Governor Sleeve is a genuine OEM component designed for the BS50-4s and BS60-4s series gasoline vibratory rammers, as well as a wide range of VP and WP series vibratory plate compactors. As a direct Wacker Neuson OEM part, the is manufactured to the exact tolerances required by the original engine governor assembly, ensuring consistent engine speed regulation across every duty cycle. This sleeve is confirmed to fit numerous BS-series rammer configurations including standard, high-altitude, and EU-spec variants, along with select VP1030R, VP1135R, VP1340R, VP1550R, VP2050R, WP1550R, and WP1550RW plate compactor models. Sourcing the correct OEM sleeve means your equipment performs as intended without improvised fixes or accelerated wear on adjacent governor components.

Key Features

  • OEM-Matched Governor Tolerances — Manufactured to the precise dimensional specs of the original engine governor assembly, maintaining accurate throttle response and consistent engine RPM under load.
  • Direct Drop-In Installation — Engineered to seat within the existing governor linkage without modification, aligning immediately with the governor shaft and surrounding components.
  • Broad Fitment Across BS and VP/WP Families — Compatible with BS50-4s, BS60-4s, BS50-4, and BS60-4 rammers in standard, EU, and high-altitude configurations, plus a wide range of VP and WP vibratory plate compactors.
  • Protects Engine Speed Stability — A worn or damaged governor sleeve allows excess play in the governor linkage, causing erratic RPM, rough operation, and unnecessary stress on the engine — replacing it restores smooth, controlled power delivery.
  • Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, part number 5000029436 carries the same quality assurance as the sleeve installed at the factory.

The engine governor sleeve is a small but critical component within the mechanical governor system that regulates engine speed. It acts as a precision bushing or guide within the governor linkage, allowing the governor arm to move smoothly and respond accurately to changes in load. When the sleeve wears out or becomes damaged, it introduces unwanted play into the linkage, causing the governor to hunt, surge, or fail to hold a stable RPM — symptoms that reduce compaction performance in rammers and plate compactors alike and can accelerate wear across the entire engine assembly. Replacing a worn sleeve with the correct OEM part restores precise governor movement and keeps the engine running at its intended operating speed.

Part Details

Part Number5000029436
Old Part Number0029436
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionEngine Governor Sleeve

Compatibility & Fitment

Name Model Machine Number
Vibratory Rammer with 280mm/11 in Shoe BS50-4s 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680
BS60 -4s RMR,11 PL SHOE,HA 42 BS60-4s 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111
Four-cycle Rammer,280mm/11in S hoe BS60-4s EU 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239
Four-stroke Vibratory Rammer, 280mm/11in Shoe BS50-4s EU 5000620811
Four-cycle Vibratory Rammer, 2 20mm/11in Shoe BS50-4 5000620077, 5000620108, 5000009386
Four-stroke Vibratory Rammer, 280mm/11in Shoe BS60-4 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984
Value Vibratory Plate, 11kN, 3 50mm/13.8in VP1135R 5000008709
Vibratory Plate, 15 kN, 500mm/ 19.5in WP1550RW 5000007578
Vibratory Plate, 15 kN, 500mm/ 19.5in WP1550R 5000007581
VP1030R-VIBROPLATE VP1030R 5000008702, 5000009504
Value Vibratory Plate, 11 kN, 356mm/14in VP1135RW 5000009251, 5000009512
Vibratory Soil Plate, 50 kN VP50H 5000009542
Vibratory Soil Plate, 60 kN VP60H 5000009543
280/11in Shoe, Vibratory Ramme r MS54 5200008223
Value Vibratory Plate, 13 kN, 400mm/15.5in VP1340RW 5000009034
Vibratory Rammer with 280mm/11 in Shoe BS50-4HO EU 5000620818
Value Vibratory Plate, 15 kN, 500mm/19.5in VP1550RW 5000009030
Single Direction Plates AP1550R 5000009538
VP50Hw-VIBROPLATE VP50Hw 5000630096
VP60Hw-VIBROPLATE VP60Hw 5000630097
Value Vibratory Plate, 15 kN, 500mm/19.5in VP1550R 5000009029
Value Vibratory Plate, 13 kN, 400mm/15.5in VP1340R 5000009033
Value Vibratory Plate, 20 kN, 500mm/19.5in VP2050R 5000009088
Vibratory Soil Plate, 40 kN VP40H 5000009535
Vibratory Plate 300mm/12in VPR1330 5000006512
Value Vibratory Plate, 10 kN, 356mm/14in VP1035R 5000008208
50mm/2in Centrifugal Trash Pum p PT2R 5000007160, 5000006790
Basic floor saw, ø 450mm/18in BFS 1345B 5000008909, 5000610142
Floor Saw BFS 130RM 5000009520
Floor Saw BFS 130R 5000009521
Floor Saws BFS18D 5000630009
Petrol Floor Saw BFS 1350L BFS 1350L 5000008936
Vibratory Rammer, 280mm/11in S hoe BS500-4 5000009329
Vibratory Rammer, 280mm/11in S hoe BS600-4 5000009331
Floor Saw BFSX 130RM 5000009523
Floor Saw BFSX 130R 5000009524
High Cycle Portable Generator GH3500E 5000005785
Single Direction Asphalt Plate VP2050RW 5000009511
BFS 1345 SAW,BZ BFS 1345BZ 5000610243
Portable Inverter Generator GPi1700 5000620777, 5000620778

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.