The Wacker Neuson Shaft Seal is a genuine OEM component designed for BPS, BPU, and DPU series vibratory plate compactors. As a direct OEM replacement, part is manufactured to the same specification as the original, ensuring a proper fit in the exciter housing without adaptation. This seal services an extensive range of models including the BPS 2550A, BPU 2440A, BPU 2450A, BPU 2950A, DPU 2430F, DPU 2440F, DPU 2440H, DPU 2450F, DPU 2450H, DPU 2870, DPU 2950, DPU 2960, DPU 2970, DPS3050, DPS3060, and DPS3060Hv. Sourcing the correct OEM shaft seal is the most reliable way to restore compactor performance and protect the exciter unit from oil leakage and contamination.
Key Features
- OEM Sealing Integrity — Manufactured to the original material grade and compression specification, maintaining the oil-tight barrier the exciter housing demands under continuous vibration load.
- Drop-In Fitment — Sized and profiled to seat directly into the exciter housing bore of compatible BPS, BPU, and DPU plate compactors, matching the original installation interface exactly.
- Broad Model Coverage — A single seal part number covers the BPS 2550A, BPU 2440A/2450A/2950A, DPU 2430F/2440F/2440H/2450F/2450H/2870/2950/2960/2970, DPS3050, DPS3060, and DPS3060Hv.
- Protects the Exciter Assembly — A worn or failed shaft seal allows exciter oil to escape and contaminants to enter, leading to accelerated bearing wear and potential exciter failure; replacing it promptly preserves the entire exciter unit.
- Genuine Wacker Neuson OEM Part — Supplied as an authorized OEM component, part number 5000044635 meets the same quality and dimensional standards as the seal installed at the factory.
The shaft seal sits around the exciter shaft where it exits the exciter housing on a vibratory plate compactor. Its job is to retain the oil that lubricates the eccentric weights and bearings inside the exciter while keeping dust, water, and debris out. When the seal degrades — through heat cycling, abrasion, or age — it begins to weep or leak oil, starving the exciter of lubrication and allowing contaminants to accelerate internal wear. Replacing a failed shaft seal promptly is one of the lowest-cost interventions that prevents a much more expensive exciter rebuild.
Part Details
| Part Number | 5000044635 |
|---|---|
| Old Part Number | 0044635 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shaft Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Reversible Vibratory Plate, 24 kN, 30cm/12in | DPU 2430F | 5000006200 |
| Vibration Plate BPU 2950A WSM | BPU 2950A | 5000007873, 5000007962 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2450F | 5000007876 |
| Vibration Plate DPU 2440F WGB | DPU 2440F | 5000007877, 5000007878, 5000007879, 5000007886 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Single Direction Vibratory Pla te, 30kN, 50cm/20in | DPS3050 | 5000006962 |
| Single Direction Vibratory Pla te, 30kN, 60cm/24in | DPS3060 | 5000006963, 5000008422 |
| Reversible Vibratory Plate, 28 kN, 70cm/28in | DPU 2870 | 5000007289 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950Y | 5000007874 |
| Reversible Vibratory Plate, 29 kN, 70cm/28in | DPU 2970 | 5000007880 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950 | 5000007881, 5000007884 |
| Vibration Plate DPU 2960 | DPU 2960 | 5000007883 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
