The Wacker Neuson Grooved Ball Bearing is a genuine OEM component designed for DPU-series reversible vibratory plate compactors. As a direct factory replacement, this bearing is sourced to the same specification as the original, ensuring consistent performance across the DPU 7060, DPU 7060SC, DPU 7060RC, DPU 7060Fe, DPU 7060Fet, DPU 9070, and DPU 100-70 model families. Genuine OEM designation means the carries the same part number and material grade used on the production line — there is no guesswork on fitment or compatibility. When it is time to restore your compactor's drive system, this is the correct bearing for the job.
Key Features
- Genuine OEM Bearing Tolerance — Manufactured to the same radial clearance and load rating as the original, maintaining proper shaft alignment and smooth rotation within the DPU drive assembly.
- Drop-In Installation — Matches the original bearing seat dimensions on DPU-series plates, seating directly into the existing housing without machining or shimming.
- Broad DPU Series Coverage — Confirmed fitment across DPU 7060, DPU 7060SC, DPU 7060RC, DPU 7060Fe, DPU 7060Fet, DPU 9070, and DPU 100-70 reversible vibratory plate compactors.
- Sustained Compaction Force — A correctly seated grooved ball bearing keeps the eccentric shaft running true, preserving the full compaction output these heavy-duty DPU plates are built to deliver.
- Protects Surrounding Components — A worn or failed bearing allows shaft play that can damage the exciter housing and eccentric weights — replacing it promptly contains the repair to a single, lower-cost part.
A grooved ball bearing supports the rotating shaft within the exciter unit of a reversible vibratory plate compactor, carrying both radial and axial loads generated by the spinning eccentric weights that produce compaction force. It keeps the shaft centered and spinning freely, allowing the exciter to develop consistent, controlled vibration through the base plate. When this bearing wears or fails, the shaft loses its precise seating — operators will typically notice increased vibration noise, reduced compaction output, or heat buildup near the exciter housing, all of which signal that the bearing needs immediate replacement to prevent further mechanical damage.
Part Details
| Part Number | 5000044951 |
|---|---|
| Old Part Number | 0044951 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Grooved Ball Bearing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Reversible Vibratory Plate, 10 0kN, 70cm/28in | DPU 100-70 | 5000007942, 5000610320, 5000008991, 5000008900 |
| Reversible Vibratory Plate, 70 kN, Remote Control | DPU 7060SC | 5000008927 |
| DPU 7060Fe | DPU 7060Fe | 5000610236 |
| DPU7060Fet | DPU 7060Fet | 5000610237 |
| Vibration Plate DPU 9070 | DPU 9070 | 5000007941 |
| Reversible Vibratory Plate, 70 kN, 60cm/24in | DPU 7060 | 5000007938 |
| Reversible Vibratory Plate, 70 kN, Remote Controll | DPU 7060RC | 5000007939 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
