Wacker Neuson 5000045940 Rocker Switch 20A/125V/1.5Hp
Wacker Neuson

Wacker Neuson 5000045940 Rocker Switch 20A/125V/1.5Hp

$47.49
(No reviews yet) Write a Review
SKU:
5000045940-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Rocker Switch 20A/125V/1.5Hp is a genuine OEM component designed for the EHB 10 and EH 8 series electric demolition hammers. As a direct factory replacement, this switch is built to the exact electrical ratings required by the machine — 20 amps, 125 volts, and 1.5 horsepower — ensuring correct operation without any guesswork. Wacker Neuson genuine OEM parts are sourced directly through the manufacturer's supply chain, so you can be confident this component matches the original specification. Compatible across a wide range of EHB 10 and EH 8 model variants including 110V, 230V, 240V, and multi-voltage configurations.

Key Features

  • Correct Electrical Rating for This Application — Rated at 20A/125V/1.5Hp to match the exact switching demands of the EHB 10 and EH 8 series electric hammers, preventing overload or premature failure.
  • Genuine OEM Component — Sourced directly from Wacker Neuson, this rocker switch meets the original design specification, ensuring proper circuit control and consistent triggering response.
  • Broad EHB 10 and EH 8 Series Coverage — Fits a wide range of model variants across 110V, 115V, 127V, 230V, 240V, and multi-voltage configurations, making it the correct choice for most EHB 10 and EH 8 series hammers.
  • Restores Full Power Control — A worn or failed rocker switch can cause intermittent power loss, failure to start, or inability to shut the tool off safely; replacing it restores clean, reliable on/off control.
  • Electrical Safety Compliance — As a primary power switch on a 230V/110V electric demolition tool, using a correctly rated OEM switch is critical to safe operation and protection against electrical fault conditions.

The rocker switch on an electric demolition hammer is the primary on/off control that connects and interrupts power to the motor. It must handle the full electrical load of the tool every time it is switched on under load, making its current and voltage ratings critical to safe, stable operation. When a rocker switch begins to fail, operators may notice intermittent power, a tool that won't start, or one that cannot be switched off — any of which requires immediate attention before the tool is used again.

Part Details

Part Number5000045940
Old Part Number0045940
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionRocker Switch 20A/125V/1.5Hp

Compatibility & Fitment

Name Model Machine Number
Electric Drilling/Chisseling H ammer, 19x82.5, 230V EHB 10/230 5000006943, 5000007081, 5000007082, 5000007083, 5000007087, 5000007494
Electric Hammer EHB 10/240 EHB 10/240 5000007084, 5000007085
Electric Drilling/Chisseling H ammer, Spline, 115V EHB 11/110 5000007096
Electric Hammer EHB 10/110 EHB 10/110 5000007202, 5000007203, 5000007204
Electric Hammer EHB 10/100 EHB 10/100 5000007205
El. Hammer EHB 10/042/200 EHB 10/042/200 5000007222
El. Hammer EHB 10/115/200 EHB 10/115/200 5000007255
El. Hammer EHB 10/250/200 EHB 10/250/200 5000007264
El. Hammer EHB 10/127 WMM EHB 10/127 5000007351
El. Hammer EH 8/042/200 EH 8/042/200 5000007364

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.