The Wacker Neuson Protective Hose Sleeve is a genuine OEM component designed for the BS50-2, BS60-2, BS70-2, and BS70-2i series vibratory rammers, as well as BH 22, BH 23, BH 24, BH 55, and BH 65 series gasoline breakers. As a factory-original part, the meets Wacker Neuson's engineering specifications and installs directly without adaptation. Fitment spans a wide range of two-cycle, oil-injected, and variable-speed rammer configurations across standard and high-altitude variants, as well as the full range of BH-series gasoline breakers. Confirming your machine's model number before ordering ensures an exact match from this extensive fitment list.
Key Features
- Genuine OEM Material Grade: — Manufactured to Wacker Neuson's original abrasion and flex-resistance specification, ensuring the sleeve withstands the constant vibration and mechanical stress inherent to rammer and breaker operation.
- Direct-Fit Replacement: — Dimensioned to the original hose routing on BS50-2, BS60-2, BS70-2, and BH-series machines, so the sleeve seats correctly against existing mounting points and clamps.
- Broad Model Coverage: — Confirmed fitment across BS50-2, BS60-2, BS70-2, BS500, BS600, BS700, BS65-V, BH 22, BH 23, BH 24, BH 55, and BH 65 series equipment, covering standard, EU, oil-injected, and high-altitude variants.
- Hose Protection Under High-Vibration Loads: — Shields fuel and fluid lines from chafing, cracking, and premature wear caused by the repetitive impact cycles these machines generate, preserving line integrity over extended service intervals.
- Fuel System Safety Relevance: — A damaged or missing protective sleeve allows hose surfaces to abrade against metal components, increasing the risk of fuel line failure. Replacing a worn sleeve promptly is a straightforward step in maintaining safe fuel system operation on gasoline-powered rammers and breakers.
The Protective Hose Sleeve routes around fuel or fluid lines on vibratory rammers and gasoline breakers, shielding those lines from the abrasion and flex fatigue generated by continuous impact operation. Without adequate protection, hose surfaces can wear through at contact points, leading to seepage or line failure that takes the machine out of service. Keeping this sleeve in good condition is a routine but important part of fuel system maintenance on BS-series rammers and BH-series breakers.
Part Details
| Part Number | 5000047348 |
|---|---|
| Old Part Number | 0047348 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Protective Hose Sleeve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Vibratory Rammer with 280mm/11 in Shoe | BS500 | 5000007550, 5000008049, 5000008048, 5000009075, 5000009074, 5000008204 |
| Vibratory Rammer with 280mm/11 in Shoe | BS600 | 5000007551, 5000008207, 5000009077, 5000008205, 5000009307 |
| Vibratory Rammer, 280mm/11in S hoe | BS700 | 5000008051, 5000007552, 5000008052, 5000009079, 5000008206, 5000009308 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| Vibratory Rammer with 254mm/10 in Shoe | BS52Y | 5000007508, 5000008053, 5000008054, 5000009409, 5000007148, 5000007559, 5000007560, 5000007609 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS650 | 5000008209 |
| Vibratory Rammer, 254mm/10in S hoe | BS500S | 5000009211 |
| Vibratory Rammer, 280mm/11in S hoe | BS600S | 5000009212 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS600-oi | 5000009166, 5000009262 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS500-oi | 5000009165, 5000009343 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5000009396, 5100016651 |
| Oil-injected Rammer, 330mm/13i n Shoe | BS700-oi | 5000009167, 5000009328 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS65Y | 5000007567, 5000007566 |
| Gasoline Breaker, tool holder 27x80 | BH 23 | 5000007891, 5000007892, 5000007893, 5000007894, 5000610292, 5000610377, 5000610378, 5000610379, 5000610380, 5000610381, 5000008333 |
| Petrol Breaker BH 23 RS | BH 23 RS | 5000008595 |
| Gasoline Tie Tamper, tool hold er 27x80 | BH 22 | 5000007890 |
| Petrol Breaker BH 22 | BH 22 RS | 5000007953 |
| BH24-BREAKER, 27x80mm round | BH 24 | 5000008937, 5000008993, 5000008994, 5000610293, 5000008992, 5000610342, 5000610382, 5000610383, 5000610384, 5000610385, 5000610386 |
| Petr. Breaker BH24LowV.EE27x80 | BH 24 Low Vib | 5000008995, 5000610082, 5000610083, 5000610081, 5000610343, 5000610388, 5000610389, 5000610390, 5000610391, 5000610392 |
| Gasoline Breaker | BH 24 Low Vib RS | 5000008996, 5000610393 |
| Petrol Breaker BH 23 Loxam | BH 23 Loxam | 5000610296 |
| BS30 | BS30 | 5000005216 |
| BH 55, 27x80 | BH 55 27x80 | 5100004026 |
| BH 55, hex 25x108 | BH 55 25x108 | 5100004027 |
| BH 55, hex 28x152 | BH 55 28x152 | 5100004028 |
| BH55 28x160 | BH 55 28x160 | 5100004029 |
| Petrol Breaker | BH 55 27x80 CN | 5100004030 |
| BH 65, 27x80 | BH 65 27x80 | 5100004032 |
| BH 65, hex 25x108 | BH 65 25x108 | 5100004033 |
| BH 65, hex 28x152 | BH 65 28x152 | 5100004034 |
| BH65 28x160 | BH 65 28x160 | 5100004035 |
| BH65 32x160 | BH 65 32x160 | 5100004036 |
| BH55rw 27x80 | BH 55rw 27x80 | 5100004038 |
| BH55rw 25x108 | BH 55rw 25x108 | 5100004039 |
| BH 55rw 28x152 | BH 55rw 28x152 | 5100004040 |
| BH55rw 28x160 | BH 55rw 28x160 | 5100004041 |
| BH55rw 32x160 | BH 55rw 32x160 | 5100004042 |
| BH55RW RS 27x80 | BH 55rw rs 27x80 | 5100004043 |
| BH65 Gasoline Breaker | BH 65 | 5000610387 |
| Petrol Breaker BH 23 SJT | BH 23 SJT | 5000610410 |
| Petrol Breaker | BH 55 27x80 JP | 5100004031 |
| BH65 Gasoline Breaker | BH 65 28x152 US | 5100004037 |
| BH 23 27x80 CN | BH 23 27x80 CN | 5100010066 |
| Vibratory Rammer | BS60Y | 5000006779, 5000007509 |
| Vibratory Rammer with 250mm/10 in Shoe | BS45Y | 5000007137 |
| Vibratory Rammer with 152mm/6i n Shoe | BS45YA | 5000007558 |
| Petrol Breaker | BH55 27x80 SEA | 5100026903 |
| Petrol Breaker | BH55rw 27x80 SEA | 5100026904 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
