The Wacker Neuson Cap is a genuine OEM component designed for a wide range of Wacker Neuson BTS cut-off saws, BPU and DPU reversible vibratory plate compactors, and BFS floor saws. As a direct OEM replacement, part is manufactured to the same specifications as the original, ensuring a consistent, accurate fit across every compatible machine in the lineup. Confirmed fitment spans multiple series including the BTS 630, BTS 635, BTS 930, BTS 935, BTS 1030, BTS 1035, BTS 1140, BPU 2540, BPU 3050, BPU 3545, BPU 3750, BPU 5045, DPU 2540H, DPU 3050H, DPU 4045H, DPU 5045H, DPU 6055, DPU 9070, DPU 100-70, and BFS 1345 and BFS 1350 floor saws. Sourcing genuine OEM parts like the keeps your equipment performing as intended and ensures the replaced component matches what left the factory.
Key Features
- Genuine OEM Construction — Manufactured by Wacker Neuson to original design tolerances, so the cap seats, seals, or retains exactly as the factory-installed unit does.
- Drop-In Replacement — Matches the original mounting interface on all listed models; installs directly without rework or adaptation to surrounding components.
- Broad Cross-Series Fitment — A single part number covers BTS cut-off saws, BFS floor saws, and BPU and DPU reversible vibratory plate compactors across a wide production range, simplifying parts management for mixed fleets.
- Protects the Assembly It Covers — A correctly fitted cap keeps contaminants, moisture, and debris out of the port, fitting, or component it protects, preventing accelerated wear to the parts beneath it.
- Fuel or Fluid System Integrity — Where the cap serves a fuel or fluid port, a worn or missing cap risks contamination or leakage; replacing promptly with the correct OEM part maintains safe, clean fluid management.
A cap on construction equipment serves as a protective closure for a port, reservoir, or fitting — keeping contaminants such as dirt, dust, and moisture from entering the system it covers. Depending on where it is positioned on the machine, it may seal a fuel tank opening, an oil fill point, or a hydraulic or lubrication port. When a cap is cracked, missing, or no longer seals properly, the underlying system becomes vulnerable to contamination, which can cause accelerated wear, fluid loss, or component damage over time. Replacing a worn cap promptly with the correct OEM part is one of the simplest preventive maintenance steps an operator can take to protect a machine's core systems.
Part Details
| Part Number | 5000069186 |
|---|---|
| Old Part Number | 0069186 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cap |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Cut-off saw BTS 635 | BTS 635 | 5000610190, 5000610191 |
| Cut-off saw BTS630 | BTS 630 | 5000610186, 5000610187 |
| Cut-off Saw BTS 635S | BTS 635S | 5000610192, 5000610193, 5000610407 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| BPU2540A | BPU 2540A | 5000008758 |
| BPU 3050A | BPU 3050A | 5000008763 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Reversible Vibratory Plate, 35 kN, 45cm/18in | BPU 3545A | 5000008783 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| Power Cutter BTS 1035 L3 | BTS 1035 L3 | 5000008912, 5000008990, 5000610076, 5000610182 |
| Cut-Off Saws | BTS 1030 L3 | 5000008989, 5000610075 |
| V.Plate DPU 5045Heap | DPU 5045H | 5000610046, 5000610052, 5000610047, 5000007862, 5000007936, 5000007965, 5000610045 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| BPU 3050A US | BPU 3050A US | 5000610361 |
| Cut-Off Saws | BTS 930 L3 | 5000008987, 5000610073 |
| Cut-Off Saws | BTS 935 L3 | 5000008988, 5000610074 |
| V.Plate DPU 4045Hap | DPU 4045H | 5000610044, 5000610051, 5000610064, 5000007888, 5000007935, 5000610043 |
| V.Plate DPU 6055Heap | DPU 6055 | 5000610049, 5000610050, 5000008766, 5000008767, 5000008768, 5000610048 |
| DPU6055-VIBROPLATE | DPU 6055He | 5000610053 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Cut-off Saw with 20mm Arbor | BTS 930 | 5000008340 |
| Cut-off Saw with 1in Arbor | BTS 935 | 5000008341 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| BPU 3750Ats | BPU 3750Ats | 5000610408 |
| BPU3750Ats | BPU 3750Ats US | 5000610423 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Cut-off Saw with 1in Arbor | BTS 1035 | 5000007975 |
| Cut-off Saw with 20mm Arbor | BTS 1030 | 5000008339 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| Reversible Vibratory Plate, 10 0kN, 70cm/28in | DPU 100-70 | 5000007942, 5000008991, 5000008900 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| vibration plate DPU 4045Y | DPU 4045Y | 5000610027 |
| BTS 1140L3 SAW | BTS 1140 L3 | 5000610063, 5000610078 |
| DPU6055-VIBROPLATE | DPU 6055 WC | 5000610175 |
| Vibration Plate DPU 9070 | DPU 9070 | 5000007941 |
| Floor Saw BTS 630S | BTS 630S | 5000610406 |
| BTS635s | BTS635s | 5100005408 |
| vibratory Plate | BPU2540A CN | 5100046522 |
| BTS635S Cut-off Saw | BTS 635s | 5100005409, 5100005411 |
| Cut-off Saw with 1in Arbor | BTS 13 | 5000007338 |
| Cut-off saw with 7/8in Arbor | BTS 11 | 5000007421 |
| Vibration Plate | BPU3050A CN | 5100039661 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
