The Wacker Neuson Fan is a genuine OEM Fan designed for a broad range of Wacker Neuson equipment, including PDT2A and PDT3A diaphragm trash pumps, PDI2A and PDI3A inline diaphragm pumps, VP and VP-W single-direction vibratory plates, BPS single-direction vibratory plates, WP1235A series vibratory plates, CT24 and CT30 walk-behind concrete trowels, the PG2A power unit, and the A3000 gasoline power unit for internal vibrators. As a genuine OEM component, part is manufactured to Wacker Neuson's original design specifications, ensuring it integrates correctly with the existing engine and cooling architecture across all listed models. This broad cross-model compatibility makes the a practical stock item for dealers, rental fleets, and contractors running multiple Wacker Neuson machines. Confirm your model number before ordering to ensure this fan matches your specific machine configuration.
Key Features
- Genuine OEM Airflow Specification — Manufactured to the original blade pitch, diameter, and rotational balance spec, so cooling output matches what the engine was designed to receive.
- Direct-Mount Replacement — Matches the original bolt pattern and shaft interface, allowing straightforward installation without modification to the engine housing or shroud.
- Wide Cross-Model Fitment — Compatible with PDT, PDI, VP, BPS, WP, CT, PG, and A3000 series machines, covering diaphragm pumps, vibratory plates, walk-behind trowels, and power units.
- Sustained Engine Temperature Control — A correctly functioning fan maintains optimal operating temperature; a cracked, chipped, or out-of-balance fan blade can cause engine overheating and accelerated wear.
- Balanced for Vibration-Intensive Applications — Engineered to perform consistently on compaction and pump equipment where engine vibration loads are higher than typical stationary applications.
The fan draws or pushes air across the engine's cooling fins to dissipate heat generated during operation. On air-cooled engines — common across Wacker Neuson's compaction and pump equipment lines — the fan is the primary means of temperature regulation, replacing the liquid coolant circuit found in larger machines. If the fan is damaged, missing blades, or fails to spin at the correct speed, the engine will run hot, triggering thermal shutdowns, accelerating cylinder and piston wear, and ultimately shortening engine service life. Replacing a worn or damaged fan promptly is one of the simplest ways to protect the engine from heat-related failure.
Part Details
| Part Number | 5000070976 |
|---|---|
| Old Part Number | 0070976 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fan |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611, 5000620769 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616, 5000620773 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007628, 5000007629, 5000009407, 5000620775 |
| PG2A | PG2A | 5000007658, 5000009054 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059, 5100029066, 5100018353 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Single Direction Plates | AP1135A | 5000009519 |
| Gasoline Power Unit for Intern al Vibrator | A3000 | 5000006237 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| PDI2A(I) | PDI2A(I) | 5000620772 |
| PDI3A(I) | PDI3A(I) | 5000620776 |
| VP1135A | VP1135A US | 5100029064, 5100018351 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1340A | BPS1340A | 5100059906 |
| VP1135AWSingle Direction Vibratory Plate | VP1135Aw US | 5100018350, 5100029063 |
| VP1135Aw | VP1135Aw | 5100029065, 5100018352 |
| Single direction vibratory plate VP1030Aw | VP1030Aw | 5100018356 |
| Single direction vibratory plate VP1030A | VP1030A | 5100018357 |
| Vibration Plate | VP1135Aw CN | 5100039666 |
| Vibratory Plate BPS1030Aw US | BPS1030Aw US | 5100080503 |
| Vibratory Plate BPS1030A US | BPS1030A US | 5100080504 |
| BPS1135Aw | BPS1135Aw US | 5100080505 |
| BPS1135A | BPS1135A US | 5100080506 |
| BPS1340Aw | BPS1340Aw US | 5100080507 |
| BPS1340A | BPS1340A US | 5100080508 |
| Vibratory Plate BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| Vibratory Plate BPS1030A EU | BPS1030A EU | 5100084344 |
| Vibratory Plate BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| Vibratory Plate BPS1135A EU | BPS1135A EU | 5100084348 |
| Vibratory Plate BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| Vibratory Plate BPS1340A EU | BPS1340A EU | 5100084350 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
