The Wacker Neuson 5000071008 Piston Pin is a genuine OEM component designed for a broad range of Wacker Neuson equipment, including BS50-4As and BS60-4As vibratory rammers, VP1030A, VP1135A, and WP-series single-direction vibratory plates, and PDI/PDT diaphragm trash pumps. As a direct OEM replacement, the part is manufactured to the same specification as the original part, ensuring correct dimensional tolerances for a proper fit within the engine assembly. This piston pin is also confirmed for use across CT-series walk-behind concrete trowels and select A3000 power units, making it one of the more widely applied engine internals in the Wacker Neuson parts catalog. Confirm your model and machine number before ordering to ensure this is the correct pin for your application.
Key Features
- OEM-Matched Dimensional Tolerancing — Manufactured to the same bore diameter and surface finish as the original, ensuring correct wrist-pin-to-piston clearance and preventing premature wear at the connecting rod interface.
- Drop-In Engine Assembly Fit — Designed to install directly into the piston and connecting rod without reworking bores or bearing surfaces, maintaining correct pin retention and alignment.
- Wide Cross-Family Fitment — Confirmed for BS-series vibratory rammers, VP/WP single-direction vibratory plates, PDI/PDT diaphragm trash pumps, CT walk-behind trowels, and A3000 power units.
- Restores Full Power Stroke Efficiency — A worn or failed piston pin allows lateral movement inside the bore, causing knock, power loss, and accelerated piston and cylinder wall damage; replacing it restores a solid, controlled stroke cycle.
- Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, part number 5000071008 carries full OEM traceability and is backed by Wacker Neuson's parts program.
The piston pin — also called a wrist pin — connects the piston to the small end of the connecting rod, forming the pivot point that converts the linear motion of the piston into rotational force at the crankshaft. It must maintain an exact fit within both the piston bosses and the rod bearing to keep combustion loads properly distributed across the assembly. When the piston pin wears, becomes loose, or fails, it causes audible knocking, increased vibration, rapid wear of the surrounding bores, and ultimately engine seizure if left unaddressed. Replacing the pin at the first sign of play or noise is essential to protecting the crankshaft, rod, and cylinder from secondary damage.
Part Details
| Part Number | 0071008 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Piston Pin |
Compatibility & Fitment
| Name | Models | Machine Number |
|---|---|---|
| 50mm/2in Diaphragm Trash Pump | PDT2A | 5000007610, 5000007611, 5000620769 |
| 50mm/2in Inline Diaphragm Tras h Pump | PDI2A | 5000007624, 5000007625 |
| 75mm/3in Diaphragm Trash Pump | PDT3A | 5000007614, 5000007615, 5000007616, 5000620773 |
| 75mm/3in Inline Diaphragm Tras h Pump | PDI3A | 5000007629, 5000009407, 5000007628, 5000620775 |
| 610mm/24 inch Walk-behind Trow el | CT24-4A EU | 5000620849 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT-E | 5000007587, 5000008002 |
| 762mm/30in CE Walk-behind Trow el | CT30ADT | 5000008005, 5000008001, 5000008197 |
| AP 1135A | AP 1135A | 5000009519 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605 |
| BS60-4As Vibratory Rammer, 11" Plastic Shoe | BS60-4As | 5200014910, 5100015123, 5200018232, 5200018231, 5200018233, 5100027198 |
| CT24-4A Trowel | CT24-4A | 5000620105 |
| Gasoline Power Unit for Intern al Vibrator | A3000 | 5000006237 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| PDI2A(I) | PDI2A(I) | 5000620772, 5100075511 |
| PDI3A(I) | PDI3A(I) | 5000620776, 5100075509 |
| PG2A | PG2A | 5000007658, 5000009054 |
| Single Direction Plate | WP1030Aw | 5000630110 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| Single direction vibratory plate WP1030A | WP1030A | 5000630015 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Value Vibratory Plate, 10 kN, 300mm/12in | VP1030A | 5000008701, 5100018357 |
| Vibration Plate | VP1135Aw CN | 5100039666 |
| VP1030A CE | VP1030A CE | 5000630047 |
| VP1030AW | VP1030AW | 5000630423 |
| VP1030Aw | VP1030Aw | 5100018356 |
| VP1030AW CE | VP1030AW CE | 5000009514 |
| VP1135A US | VP1135A US | 5100018351, 5100029064 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059, 5100029066, 5100018353 |
| VP1135Aw | VP1135Aw | 5100018352, 5100029065 |
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| VP1135AWSingle Direction Vibratory Plate | VP1135Aw US | 5100018350, 5100029063 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.