The Wacker Neuson 5000071023 Fuel Filter is a genuine OEM component designed for AP, BPS, and VP series vibratory plate compactors. This factory-sourced filter is confirmed for a wide range of models including the AP 1135A, AP 1550A, BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A, BPS 2550A, VP1030A, VP1135A, and VP 1135AW, among others. As a genuine Wacker Neuson part, the 5000071023 is manufactured to the same specification as the original, ensuring a correct fit and consistent engine protection across the full supported lineup. Stocking a replacement on hand keeps your compactor ready for the next job without an unplanned trip to the supply house.
Key Features
- Genuine OEM Filtration Integrity — Manufactured to the original flow-rate and micron-rating specification, so fuel delivered to the engine stays free of the contaminants that cause carburetor wear and starting problems.
- Direct Drop-In Installation — Matches the original inlet/outlet diameter and line routing of the supported AP, BPS, and VP plate compactors, so no trimming or adapting of fuel lines is needed.
- Broad Model Coverage — Fits the AP 1135A and AP 1550A battery-assist plates, the full BPS1030A through BPS2050A range, the BPS 2550A, the MP 15A, and multiple VP1030A and VP1135A variants — one part number covers the family.
- Protects Carburetor and Fuel System Components — A clean, properly flowing filter keeps debris out of the carburetor jets and fuel metering circuits; a clogged or bypassed filter is a leading cause of hard starting, rough idle, and premature carburetor failure on vibratory plates.
- Backed by Wacker Neuson OEM Sourcing — Supplied as part number 5000071023 directly within the Wacker Neuson parts program, making it straightforward to cross-reference against your machine's serial number and parts manual.
The fuel filter sits in the fuel supply line between the tank and the carburetor, trapping dirt, debris, and water droplets before they can enter the engine's fuel system. On vibratory plate compactors that operate in dusty, sandy, or muddy conditions, the filter is exposed to some of the harshest contamination environments of any small-engine application. A filter that is clogged, cracked, or past its service interval restricts fuel flow, causing lean-running conditions, hard starting, and erratic throttle response — and over time, contaminants that bypass a failed filter can block carburetor passages and damage fuel metering components that are far more costly to replace.
Part Details
| Part Number | 0071023 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuel Filter |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| AP 1135A | AP 1135A | 5000009519 |
| AP 1550A | AP 1550A | 5000009539 |
| AP 1550AW | AP 1550AW | 5000009540 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1030A US | BPS1030A US | 5100080504 |
| BPS1030A EU | BPS1030A EU | 5100084344 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1030Aw US | BPS1030Aw US | 5100080503 |
| BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1135A US | BPS1135A US | 5100080506 |
| BPS1135A EU | BPS1135A EU | 5100084348 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1135Aw US | BPS1135Aw US | 5100080505 |
| BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| BPS1340A | BPS1340A | 5100059906 |
| BPS1340A US | BPS1340A US | 5100080508 |
| BPS1340A EU | BPS1340A EU | 5100084350 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1340Aw US | BPS1340Aw US | 5100080507 |
| BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| BPS1550A | BPS1550A | 5100061215 |
| BPS1550Aw | BPS1550Aw | 5100061216 |
| BPS1550Aws | BPS1550Aws | 5100067727 |
| BPS2050A | BPS2050A | 5100061217 |
| BPS2050Aw | BPS2050Aw | 5100061218 |
| BPS 2550A | BPS 2550A | 0007528 |
| MP 15A | MP 15A | 0630318 |
| VP1030A | VP1030A | 5100018357 |
| VP1030Aw | VP1030Aw | 5100018356 |
| VP1135A US | VP1135A US | 5100018351, 5100029064 |
| VP 1135AW | VP 1135AW | 0009058 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
