The Wacker Neuson Screw M5 X 16 W/Washer is a genuine OEM fastener designed for a wide range of Wacker Neuson walk-behind concrete trowels, vibratory plate compactors, power buggies, trash pumps, and vibratory truss screeds. As a factory-sourced component, is manufactured to the exact thread pitch, head geometry, and integrated washer spec required for correct assembly and clamping load across all listed machines. Confirmed fitment includes CT36 and CT30 series walk-behind trowels, WP1540A and WP1550A series vibratory plates, WB16A series power buggies, the PT2A trash pump, VPA and VPG vibratory plate models, and HP and SP vibratory truss screed power sections. Ordering by part number ensures you receive the correct fastener the first time, with no guesswork on sizing or washer compatibility.
Key Features
- Integrated Washer Design — The captive washer distributes clamping load evenly across the mating surface, protecting housings and panels from fastener pull-through or surface damage during installation.
- Genuine OEM Thread Specification — Manufactured to the exact M5 x 16 thread pitch and torque rating specified by Wacker Neuson, ensuring full thread engagement without stripping in aluminum or steel bosses.
- Broad Cross-Family Fitment — A single part number covers CT36 and CT30 walk-behind trowels, WP1540A/WP1550A vibratory plates, WB16A power buggies, VPA/VPG plates, PT2A trash pumps, and HP/SP screed power sections.
- Correct Torque Retention — A properly spec'd fastener maintains joint integrity under vibration-intensive operating conditions, preventing panel rattles, component misalignment, or structural loosening during use.
- Direct OEM Source — Supplied as a genuine Wacker Neuson part, this screw meets the same assembly standards used on the production line, so you are not adapting or substituting a generic hardware-store equivalent.
A machine screw with an integrated washer serves as a precision fastener that secures panels, guards, brackets, and component housings to the machine frame or sub-assembly. The washer portion spreads the clamping force over a wider surface area, which is especially important on lightweight castings or sheet-metal covers where a bare screw head could crack or distort the material over time. When a screw of this type loosens, strips, or is substituted with an incorrect size, it can lead to cover vibration, misaligned components, ingress of debris, or — in worst cases — detachment of a guard or housing during operation.
Part Details
| Part Number | 5000071063 |
|---|---|
| Old Part Number | 0071063 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw M5 X 16 W/Washer |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| 50mm/2in Centrifugal Trash Pum p | PT2A | 5000006720, 5000006721 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| Power Buggy | WB16A | 5000009282, 5000008021, 5000009264 |
| Power Buggy | WB16AF | 5000009285, 5000008288, 5000009267 |
| Power Buggy | WB16AS | 5000009286, 5000009043, 5000009268 |
| Power Buggy | WB16AFS | 5000009292, 5000009048, 5000009274 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Power Buggy | WB16AD | 5000009283, 5000008022 |
| Power Buggy | WB16ADF | 5000009288, 5000008289 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Power Buggy | WB16ADS | 5000009045 |
| Power Buggy | WB16ADFS | 5000009051 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
