The Wacker Neuson 5000071082 O-Ring is a genuine OEM component designed for AP, BPS, and VP series vibratory plate compactors. This OEM part is sourced directly through Wacker Neuson's authorized parts network, ensuring it meets the exact material and dimensional specifications required for proper sealing performance. Compatible across a wide range of models including the AP 1135A, AP 1550A, AP 1550AW, BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A, BPS 2550A, and VP 1135AW, part number 5000071082 is a high-demand service part across multiple compactor families. When it's time to replace a worn or leaking O-Ring, using the correct OEM part is the surest way to restore proper function and avoid repeat service calls.
Key Features
- OEM Material Specification — Manufactured to Wacker Neuson's exact compound and durometer spec, ensuring the correct compression set and chemical resistance for this sealing application.
- Direct-Fit Replacement — Matches the original profile and cross-section so it seats correctly in the existing groove without trimming, shimming, or adaptation.
- Broad Compactor Compatibility — Fits AP battery-powered plates, BPS single-direction vibratory plates, and VP vibratory plate compactors across multiple regional variants including US and EU configurations.
- Leak Prevention — A correctly seated O-Ring maintains fluid or air pressure integrity within the assembly; a cracked or deformed ring leads to seepage, pressure loss, and accelerated wear on surrounding components.
- Fluid System Integrity — For fuel or hydraulic circuit applications, using the correct OEM seal material prevents swelling, shrinkage, or degradation that can contaminate the system or cause sudden failure.
An O-Ring is a precision sealing element installed at joints, ports, or housings to prevent the passage of fluids or air between mating surfaces. In vibratory plate compactors, O-Rings are commonly found in fuel systems, hydraulic circuits, and engine assemblies where maintaining a leak-free interface is critical to safe and efficient operation. When an O-Ring degrades — through heat cycling, chemical exposure, or mechanical compression over time — it loses its ability to conform to the mating surfaces, allowing leaks that can lead to fluid loss, contamination, or component damage if left unaddressed.
Part Details
| Part Number | 0071082 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| AP 1135A | AP 1135A | 5000009519 |
| AP 1550A | AP 1550A | 5000009539 |
| AP 1550AW | AP 1550AW | 5000009540 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1030A US | BPS1030A US | 5100080504 |
| BPS1030A EU | BPS1030A EU | 5100084344 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1030Aw US | BPS1030Aw US | 5100080503 |
| BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| BPS 1135A | BPS 1135A | 0007425 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1135A US | BPS1135A US | 5100080506 |
| BPS1135A EU | BPS1135A EU | 5100084348 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1135Aw US | BPS1135Aw US | 5100080505 |
| BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| BPS1340A | BPS1340A | 5100059906 |
| BPS1340A US | BPS1340A US | 5100080508 |
| BPS1340A EU | BPS1340A EU | 5100084350 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1340Aw US | BPS1340Aw US | 5100080507 |
| BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| BPS1550A | BPS1550A | 5100061215 |
| BPS1550Aw | BPS1550Aw | 5100061216 |
| BPS2050A | BPS2050A | 5100061217 |
| BPS2050Aw | BPS2050Aw | 5100061218 |
| BPS 2550A | BPS 2550A | 0007528 |
| MP 15A | MP 15A | 0630318 |
| VP 1135AW | VP 1135AW | 0009058 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
