The Wacker Neuson Fan is a genuine OEM Fan designed for an exceptionally wide range of Wacker Neuson equipment, including BFS735 floor saws, CT36-5A and CT30/CT36 series walk-behind concrete trowels, PT2A trash pumps, GP2500A and GV2500A portable generators, and WP, VP, BPU, and BPS series vibratory plate compactors. As a factory-sourced component, part is manufactured to the exact tolerances and airflow specifications Wacker Neuson engineers built into each of these platforms. With confirmed fitment across dozens of configurations — from the WP1540A and WP1550A single-direction vibratory plates to the PG3A power unit and A5000 internal vibrator power section — this fan is a high-demand service part worth stocking for fleets running multiple Wacker Neuson machine types. Verify your model number against the fitment list before ordering to ensure a correct match.
Key Features
- Genuine OEM Airflow Specification — manufactured by Wacker Neuson to the exact blade geometry and rotational balance spec required for correct cooling performance across all listed platforms.
- Direct-Mount Replacement — engineered to install on the original fan mounting points without alteration, maintaining correct blade-to-shroud clearance for consistent airflow delivery.
- Broad Cross-Platform Fitment — a single part number covering BFS735 floor saws, CT30/CT36 walk-behind trowels, PT2A trash pumps, GP2500A/GV2500A generators, WP/VP/BPU/BPS vibratory plates, and more; confirm your model number before ordering.
- Engine Temperature Management — a properly functioning fan draws cooling air across the engine fins at the correct volume and velocity; a cracked, chipped, or missing blade causes uneven airflow and accelerates thermal wear on engine components.
- Balanced for Low Vibration — factory-balanced construction prevents the harmonic vibration that an unbalanced or damaged fan introduces, protecting bearings and crankshaft seals over time.
The cooling fan on small gasoline-powered equipment draws ambient air across the engine's cylinder and cylinder head fins, dissipating the heat generated during combustion. Without adequate airflow, engine operating temperatures rise beyond safe limits, leading to accelerated wear on piston rings, cylinder walls, and valve seats — and in severe cases, seizure. On equipment like vibratory plate compactors, trowels, and generators where the engine runs at sustained high load, a fully intact and correctly balanced fan is critical to maintaining the engine's designed thermal envelope. A fan that is cracked, missing a blade, or loose on the crankshaft will deliver reduced or uneven airflow and introduce vibration that stresses adjacent engine components.
Part Details
| Part Number | 5000071652 |
|---|---|
| Old Part Number | 0071652 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fan |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS735 | BFS735 | 5100029228, 5100054573 |
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| PT2A Pump | PT2A | 5000009092, 5000009095, 5000009237, 5000006720, 5000006721, 5100058524, 5100058525, 5100042215 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| GP2500A | GP2500A | 5000620128, 5200002844, 5000620009, 5100041977 |
| PG3A | PG3A | 5000007659, 5000009055 |
| GV2500A | GV2500A | 5000009345, 5000009350, 5000009355, 5000009360, 5000620542, 5000620286 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009545, 5000009472, 5000630045 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017, 5000630046, 5100018330 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019, 5000630044, 5100018323, 5100062423 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| WPU1550A | WPU1550A | 5000630033, 5100071592 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054, 5100029057, 5100018345 |
| VP1340A VIBROPLATE | VP1340A | 5000009031, 5000630057, 5100029061, 5100018349 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062, 5100029053, 5100018361 |
| Single Direction Plate | VPH70 | 5000006907 |
| BPU2540A | BPU 2540A | 5000008758 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Modular Internal Vibrators | HD 3.7 | 5000006906 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| 50Hz Portable Generator | G2.1AE | 5000008250, 5000008244, 5000008246, 5000008248 |
| HP50A | HP50A | 5000009508 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| 50Hz Portable Generator | G2.1A | 5000008249, 5000008243, 5000008245, 5000008247 |
| Single Direction Plates | AP1550A | 5000009539 |
| BFS735 | BFS735 CN | 5100042681 |
| Portable Generator | G2.5A | 5000007188, 5000009256 |
| 50Hz Portable Generator | G5.7AE | 5000009017 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| HPG50A | HPG50A | 5000009509 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single Direction Plates | WP1550Aw | 5000630112, 5100016241, 5100062424, 5100066158 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| VP1550AW-CN | VP1550AW-CN | 5100055200 |
| Single Direction Plates | WP1540Aw | 5000630106, 5100018329 |
| WP1540Aw | WP1540Aw US | 5100018327 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| WP1550Aw | WP1550Aw US | 5100018324 |
| WP1540A | WP1540A US | 5100018328 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Floor Saws | BFS 614AB | 5000009527 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| WP1550A | WP1550A US | 5100018325 |
| VP2050Aw | VP2050Aw US | 5100029050, 5100018358 |
| VP2050A | VP2050A US | 5100029051, 5100018359 |
| VP2050Aw | VP2050Aw | 5100029052, 5100018360 |
| VP1550Aw | VP1550Aw US | 5100029054, 5100018342 |
| VP1550A | VP1550A US | 5100029055, 5100018343 |
| VP1550Aw | VP1550Aw | 5100029056, 5100018344, 5100051526 |
| VP1340Aw | VP1340Aw US | 5100029058, 5100018346 |
| VP1340A | VP1340A US | 5100029059, 5100018347 |
| VP1340Aw | VP1340Aw | 5100029060, 5100018348, 5100026775 |
| VP1340Aw | VP1340Aw Loxam | 5100029062 |
| vibratory Plate | BPU2540A CN | 5100046522 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| Soil and Asphalt Compaction | MP15A | 5000630318 |
| Vibration Plate | WP1550Aw CN | 5100039663 |
| Vibration Plate | VP2050Aw CN | 5100039664 |
| Vibration Plate | VP1340Aw CN | 5100039665 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| HPG100A | HPG100A | 5000009507 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Gasoline Powered Floor Saw | BFS 735A | 5100001816 |
| Floor saw BFS735 | BFS 735 | 5100009932 |
| PT2A(I) | PT2A(I) | 5100042613 |
| BPS1550A | BPS1550A | 5100061215 |
| BPS1550Aw | BPS1550Aw | 5100061216 |
| BPS2050A | BPS2050A | 5100061217 |
| BPS2050Aw | BPS2050Aw | 5100061218 |
| BPS1550Aws | BPS1550Aws | 5100067727 |
| Modular Internal Vibrators | D3.5A3 | 5100072402 |
| Modular Internal Vibrators | D3.5A2 | 5100072405 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
