The Wacker Neuson is a genuine OEM Insulator designed for a broad range of Wacker Neuson equipment, including CT36 and CT30 walk-behind concrete trowels, GP2500A and GV2500A portable generators, PT2A centrifugal trash pumps, VP, WP, BPU, and VPA series vibratory plate compactors, BFS floor saws, A5000 gasoline power units, and vibratory truss screed power sections. As a genuine OEM component, it is manufactured to the same specifications as the original part, ensuring correct fit and function across all compatible models. Verify your model number and machine number against the fitment list before ordering to confirm compatibility with your specific unit.
Key Features
- Genuine OEM Dielectric Integrity — Manufactured to Wacker Neuson's original insulation specifications, ensuring correct electrical isolation and heat resistance for the circuits and components this insulator protects.
- Direct Drop-In Replacement — Engineered to match the original mounting profile and connection points, allowing straightforward installation without rework or adaptation.
- Exceptionally Wide Fitment Coverage — A single part number covers CT36 and CT30 concrete trowels, GP2500A and GV2500A generators, PT2A trash pumps, VP/WP/BPU vibratory plate compactors, VPA plates, BFS floor saws, A5000 power units, and HP/SP vibratory screed power sections.
- Protects Against Electrical Faults — A properly functioning insulator prevents unintended current paths, short circuits, and heat buildup that can damage surrounding wiring, control components, or the engine ignition system.
- Electrical Safety Compliance — Correct insulation is essential for safe operation of generators, pumps, and power equipment; using a correctly rated OEM insulator maintains the integrity of the machine's electrical system.
An insulator is an electrical isolation component that prevents current from traveling along unintended paths between conductive parts, terminals, or chassis surfaces. In equipment such as generators, pumps, trowels, and plate compactors, insulators are typically found at ignition, wiring harness, or terminal mounting points where vibration and heat could otherwise cause electrical contact failures. When an insulator cracks, degrades, or breaks down, it can allow stray current, cause intermittent electrical faults, or create a short circuit that disables the machine or damages connected components — making timely replacement critical to safe and consistent operation.
Part Details
| Part Number | 5000071670 |
|---|---|
| Old Part Number | 0071670 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Insulator |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-5A Trowel | CT36-5A | 5000009438, 5200016256 |
| CT36-5A | CT36-5A EU | 5000620829 |
| CT36-5A-C Trowel | CT36-5A-C | 5000620040 |
| GP2500A | GP2500A | 5000620128, 5200002844, 5000620009 |
| PT2A | PT2A | 5000009095, 5000009237, 5000009092, 5000006720, 5000006721 |
| PG3A | PG3A | 5000007659, 5000009055 |
| GV2500A | GV2500A | 5000009345, 5000009350, 5000009355, 5000009360, 5000620542, 5000620286 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP | 5000007592, 5000007591 |
| 915mm/36in CE Walk-behind Trow el | CT36ADP-E | 5000008034, 5000007697 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT-E | 5000007589, 5000008004 |
| 762mm/30in CE Walk-behind Trow el | CT30AGT | 5000008006, 5000008003 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009472, 5000009545 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630017 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630019 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT-E | 5000007590, 5000008008, 5000008226 |
| 915mm/36in CE Walk-behind Trow el | CT36ADT | 5000008013, 5000008007, 5000008198, 5000008225, 5000009480 |
| VP1550AW VIBROPLATE | VP1550AW | 5000009028, 5000630055 |
| VP1340AW VIBROPLATE | VP1340AW | 5000009032, 5000630058 |
| VP1550A Single Direction Vibratory Plate | VP1550A | 5000009027, 5000630054 |
| VP2050A VIBROPLATE | VP2050A | 5000009087, 5000630062 |
| WPU1550A | WPU1550A | 5000630033 |
| WPU1550Aw | WPU1550Aw | 5000630034 |
| Vibratory Plate | VPA1740 | 5000006794, 5000008062 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| 50Hz Portable Generator | G2.1AE | 5000008250, 5000008244, 5000008246, 5000008248 |
| WPP 1550Aw | WPP1550Aw | 5000630030 |
| Vibratory Plate | VPA1750 | 5000006792 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| 50Hz Portable Generator | G2.1A | 5000008249, 5000008243, 5000008245, 5000008247 |
| Single Direction Plates | AP1550AW | 5000009540 |
| WPP 1540A | WPP1540A | 5000630025 |
| WPP 1550A | WPP1550A | 5000630029 |
| Portable Generator | G2.5A | 5000007188, 5000009256 |
| 50Hz Portable Generator | G5.7AE | 5000009017 |
| WP 2050A | WP2050A | 5000630022 |
| WPP 1540Aw | WPP1540Aw | 5000630026 |
| BPU2540A | BPU 2540A | 5000008758 |
| Single Direction Plates | AP1550A | 5000009539 |
| VP2050AW VIBROPLATE | VP2050AW | 5000009510 |
| Single Direction Plates | WP1550Aw | 5000630112 |
| Single Direction Plate | WP2050Aw | 5000630115 |
| Single Direction Plates | WP1540Aw-L | 5000630123 |
| Reversible Plates | WPU 1550A-L | 5000630124 |
| Single Direction Plates | WP1550Aw-L | 5000630126 |
| Vibratory Plate 500mm/19.5in | VPA1350W | 5000006793 |
| Floor Saws | BFS 614AB | 5000009527 |
| Single Direction Plates | WP1540Aw | 5000630106 |
| Vibratory Plate 400mm/15.5in | VPA1340 | 5000007154 |
| Gasoline Power Unit for Intern al Vibrator | A5000 | 5000009213 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| Single direction vibratory plate VP1340A | VP1340A | 5000630057 |
| Single Direction Plates | WP2050Aw-L | 5000630125 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | BPU 2440A | 5000007867, 5000007869 |
| Vibration Plate BPU 2450A | BPU 2450A | 5000007868 |
| Vibratory Truss Screed, Power Section | HP100 | 5000008291 |
| Vibratory Truss Screed, Power Section | HP50 | 5000008292 |
| Vibratory Truss Screed, Power Section | SP75 | 5000008295 |
| Vibratory Truss Screed, Power Section | SP50 | 5000008296 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HP50A | HP50A | 5000009508 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
