The Wacker Neuson is a genuine OEM Shaft Seal 45 X 60 X 8, 2B designed for RD7, RD12, RD16, RD880, RS800, and CB14B series vibratory rollers. As a factory-sourced component, part is manufactured to the exact material and dimensional tolerances specified for these machines, ensuring a correct fit in the sealing bore without modification. This seal covers an extensive range of walk-behind and ride-on tandem roller configurations across the Wacker Neuson RD and RS product families, making it a high-demand service item for dealers and independent repair shops alike.
Key Features
- OEM Lip-Seal Integrity — Manufactured to Wacker Neuson's specified elastomer compound and dimensional tolerances for a 45 x 60 x 8 mm shaft seal, maintaining correct sealing lip contact pressure against the shaft surface.
- Drop-In Replacement — Matches the original bore diameter, shaft diameter, and seal width exactly, allowing straightforward press-in installation into the existing housing without re-machining or adapters.
- Broad Roller Family Coverage — Fits RD7, RD12, RD12A, RD16, RD880, RS800, RSS800, and CB14B series machines, spanning walk-behind tandem rollers through heavier ride-on soil and asphalt compaction models.
- Protects Drive and Hydrostatic Components — A correctly seated shaft seal prevents fluid ingress and lubricant loss at the shaft exit point, protecting downstream bearings and hydrostatic drive components from contamination and premature wear.
- Fluid System Safety — A failed shaft seal can cause hydraulic or gear-oil leakage onto drum surfaces and the ground, creating a slip hazard and potential fluid-loss damage to drive components; replacing at first sign of weeping is strongly recommended.
A shaft seal sits at the point where a rotating shaft exits a housing — such as a gearbox, drum drive, or hydraulic motor — and its job is to retain lubricant inside the housing while blocking dirt, water, and debris from entering. On vibratory rollers like the Wacker Neuson RD and RS series, these seals are exposed to constant vibration, varying operating temperatures, and outdoor contaminants, all of which gradually degrade the sealing lip. When a shaft seal fails, lubricant leaks out and contaminants work inward, accelerating bearing and gear wear that can lead to costly drivetrain repairs if left unaddressed.
Part Details
| Part Number | 5000072113 |
|---|---|
| Old Part Number | 0072113 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Shaft Seal 45 X 60 X 8, 2B |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD16-90 Vibratory Roller | RD16-90 | 5000620060, 5000620127, 5000620799 |
| RD 16-100 | RD16-100 | 5000620402, 5000620798 |
| RD12A-90 ROLLER,DBL DRUM,GRN | RD12A-90 | 5000620369, 5000620058, 5000620320 |
| RD12-90 ROLLER, DOUBLE DRUM, SOLID ROPS | RD12-90 | 5000620059, 5000620321 |
| Single Drum Vibratory Roller | RS800A | 5000006581, 5000630011 |
| Single Drum Vibratory Roller | RSS800A | 5000006582, 5000630012 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11AEC | 5000007695 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11V | 5000007694 |
| Hydrostatic Double Drum Vibrat ory Roller | RD11A | 5000007693 |
| RD7 Tandem Roller | RD7A | 5100017196, 5200015243, 5200015246 |
| RD7 Tandem Roller | RD7He | 5100017193, 5100017194, 5200015241, 5200015244, 5100038031, 5100018451 |
| RD7 Tandem Roller | RD7H | 5100017195, 5100017338, 5200015242, 5200015245 |
| RD7Ye Tandem Roller | RD7Ye | 5100027116, 5100027117, 5100038032, 5100048340 |
| Single Drum Vibratory Roller | RS800H | 5000006583 |
| Single Drum Vibratory Roller ( without engine) | RS800 | 5000006585 |
| Single Drum Vibratory Roller | RS800V | 5000007187 |
| Double Drum Vibratory Roller | RD880V | 5000006736 |
| Soil and Asphalt Compaction | CB14B-900 | 5200004071, 5200004073, 5200004074, 5200005252, 5200019030 |
| Soil and Asphalt Compaction | CB14B-1000 | 5200004688, 5200019031 |
| Drum | Drum | 5100057581 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
