Wacker Neuson

Wacker Neuson 5000072773 Screw

$4.04
(No reviews yet) Write a Review
SKU:
5000072773 | 72773 | Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Screw designed for a wide range of Wacker Neuson equipment, including BFS floor saws, CT walk-behind concrete trowels, WP and VP vibratory plate compactors, PT and PDT trash pumps, BPU reversible vibratory plates, and G-series portable generators. As a direct genuine OEM component, this Screw is manufactured to the same specifications as the original hardware installed at the factory. With fitment spanning dozens of machine configurations across multiple product families, verifying your model number before ordering is recommended — use your machine's model and serial number to confirm is the correct screw for your application. This level of cross-family coverage makes it a frequently stocked item for dealers and service technicians supporting mixed fleets of Wacker Neuson equipment.

Key Features

  • Genuine OEM Hardware Grade — Manufactured to exact thread form, pitch, and material spec, ensuring correct torque retention in the application — critical for fasteners used in vibrating equipment subject to constant mechanical stress.
  • Drop-In Installation — Matches the original thread pattern and head style, so it threads directly into the existing tapped hole or nut without rework or re-tapping.
  • Broad Multi-Family Fitment — Compatible across BFS floor saws, CT walk-behind trowels, WP and VP vibratory plates, BPU reversible plates, PT and PDT trash pumps, G-series generators, and vibratory truss screed power sections — one part number serving a large fleet.
  • Vibration-Resistant Holding Power — In compaction and concrete finishing equipment, fasteners are exposed to high-frequency vibration; using the correct OEM screw maintains proper clamping force and prevents joint loosening over time.
  • Sourced Direct from Wacker Neuson — Carries the genuine Wacker Neuson part number 5000072773, confirming it is the same component used in original production and authorized service.

A screw may seem like a minor component, but in power equipment subjected to continuous vibration — such as plate compactors, floor saws, and concrete trowels — fastener integrity is essential to keeping assemblies tight and properly aligned. The correct screw delivers the right thread engagement and head bearing surface to maintain clamping load under dynamic stress. When a fastener fails or is replaced with an incorrect substitute, it can lead to loose guards, misaligned components, or accelerated wear on adjacent parts — issues that are easily avoided by using the correct OEM replacement.

Part Details

Part Number5000072773
Old Part Number0072773
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionScrew

Compatibility & Fitment

Name Model Machine Number
BFS735 BFS735 5100029228, 5100054573
CT36-5A Trowel CT36-5A 5000009438, 5200016256
CT36-5A CT36-5A EU 5000620829
CT36-5A-C Trowel CT36-5A-C 5000620040
50mm/2in Diaphragm Trash Pump PDT2A 5000007610, 5000007611
75mm/3in Diaphragm Trash Pump PDT3A 5000007614, 5000007615, 5000007616
50mm/2in Inline Diaphragm Tras h Pump PDI2A 5000007624, 5000007625
75mm/3in Inline Diaphragm Tras h Pump PDI3A 5000007628, 5000007629, 5000009407
PG2A PG2A 5000007658, 5000009054
915mm/36in CE Walk-behind Trow el CT36ADP 5000007592, 5000007591
915mm/36in CE Walk-behind Trow el CT36ADP-E 5000008034, 5000007697
762mm/30in CE Walk-behind Trow el CT30AGT-E 5000007589, 5000008004
762mm/30in CE Walk-behind Trow el CT30AGT 5000008006, 5000008003
Vibratory Plate, 15kN, 400mm/1 5.5in WP1540AW 5000008060, 5000009472, 5000009545
WP1540A VIBROPLATE WP1540A 5000008061
Vibratory Plate, 15 kN, 500mm/ 19.5in WP1550AW 5000007576, 5000009486
WP1550A Single Direction Vibratory Plate WP1550A 5000007579, 5100062423
762mm/30in CE Walk-behind Trow el CT30ADT 5000008005, 5000008001, 5000008197
915mm/36in CE Walk-behind Trow el CT36ADT-E 5000007590, 5000008008, 5000008226
915mm/36in CE Walk-behind Trow el CT36ADT 5000008013, 5000008007, 5000008198, 5000008225, 5000009480
Gasoline Power Unit for Intern al Vibrator A3000 5000006237
50mm/2in Centrifugal Trash Pum p PT2A 5000006720, 5000006721
Vibratory Plate VPA1740 5000006794, 5000008062
Vibratory Plate 587mm/18in VPG165A 5000008038
50Hz Portable Generator G2.1AE 5000008250, 5000008244, 5000008246, 5000008248
Vibratory Plate VPA1750 5000006792
762mm/30in CE Walk-behind Trow el CT30ADT-E 5000007587, 5000008002
Vibratory Plate 587mm/18in VPG170A 5000008039
50Hz Portable Generator G2.1A 5000008249, 5000008243, 5000008245, 5000008247
BFS735 BFS735 CN 5100042681
Portable Generator G2.5A 5000007188, 5000009256
BPU2540A BPU 2540A 5000008758
50Hz Portable Generator G5.7AE 5000009017
WP1540Aw WP1540Aw US 5100018327
WP1550Aw WP1550Aw US 5100018324
WP1540A WP1540A US 5100018328
Vibratory Plate 500mm/19.5in VPA1350W 5000006793
BPU 2540A US BPU 2540A US 5000610360
WP1550A WP1550A US 5100018325
Vibratory Plate 400mm/15.5in VPA1340 5000007154
Gasoline Power Unit for Intern al Vibrator A5000 5000009213
WP1550Aw WP1550Aw 5100062424, 5100066158
Reversible Vibratory Plate, 24 kN, 40cm/16in BPU 2440A 5000007867, 5000007869
Vibration Plate BPU 2450A BPU 2450A 5000007868
Vibratory Truss Screed, Power Section HP100 5000008291
Vibratory Truss Screed, Power Section HP50 5000008292
Vibratory Truss Screed, Power Section SP75 5000008295
Vibratory Truss Screed, Power Section SP50 5000008296
Vibratory Truss Screed, Power Section HP100A 5000009506
HP50A HP50A 5000009508
A5000/160 ISO A5000/160 ISO 5000610325
A5000/160 ANSI A5000/160 ANSI 5000610340
Gasoline Powered Floor Saw BFS 735A 5100001816
Floor saw BFS735 BFS 735 5100009932

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.